{
  "Uuid": "c64efcaf-d101-47cd-a7d2-d1ed51deaa01",
  "IsCustomNode": false,
  "Description": "",
  "Name": "Pegola.Dynamo.BIM.Try.New2",
  "ElementResolver": {
    "ResolutionMap": {}
  },
  "Inputs": [],
  "Outputs": [],
  "Nodes": [
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Point.ByCoordinates@double,double,double",
      "Id": "602889f410024726abf45f4b60933959",
      "Inputs": [
        {
          "Id": "42c3ff7ebfc54937a94fce7f6df41b3e",
          "Name": "x",
          "Description": "X-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "3fd92d07da3748c298b9425e81356ae3",
          "Name": "y",
          "Description": "Y-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "96814e2fa4f24a299b6d3d6ed0f66981",
          "Name": "z",
          "Description": "Z-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "13447d92bd084886864be1e860b5d78a",
          "Name": "Point",
          "Description": "Durch Koordinaten erstellter Punkt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Legt einen Punkt nach Angabe dreier kartesischer Koordinaten fest.\n\nPoint.ByCoordinates (x: double = 0, y: double = 0, z: double = 0): Point"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Point.ByCoordinates@double,double,double",
      "Id": "c3874176962846e38104d2b399c5e543",
      "Inputs": [
        {
          "Id": "ba51fe1b051a4633b2e5d057ec2e1e4c",
          "Name": "x",
          "Description": "X-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "09341a21d6d54b26905bafc14aa20c0f",
          "Name": "y",
          "Description": "Y-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "178f31ebc5e942c29f61fc87c0a20272",
          "Name": "z",
          "Description": "Z-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "fd6aa4c5a0144a8fba28eaa64bdd8ac2",
          "Name": "Point",
          "Description": "Durch Koordinaten erstellter Punkt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Legt einen Punkt nach Angabe dreier kartesischer Koordinaten fest.\n\nPoint.ByCoordinates (x: double = 0, y: double = 0, z: double = 0): Point"
    },
    {
      "ConcreteType": "CoreNodeModels.Input.DoubleSlider, CoreNodeModels",
      "NodeType": "NumberInputNode",
      "NumberType": "Double",
      "MaximumValue": 10.0,
      "MinimumValue": 1.0,
      "StepValue": 0.1,
      "InputValue": 3.0,
      "Id": "3efdef1ef063402d95887e1eec0c33cf",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "e93d8594657f48e59be8dc598f989b01",
          "Name": "",
          "Description": "Double",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ein Schieberegler zur Erzeugung numerischer Werte"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Point.ByCoordinates@double,double,double",
      "Id": "5aa9c1d1c8364905981ac703c581225c",
      "Inputs": [
        {
          "Id": "ffda7c447a184421bd1717c1c6d57280",
          "Name": "x",
          "Description": "X-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "aafe7305eeaa45eca71c1ca9304bc957",
          "Name": "y",
          "Description": "Y-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b8ea6454ee324791a1569bdcd2a65865",
          "Name": "z",
          "Description": "Z-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "beb27e90f549428e8840a841b69405b9",
          "Name": "Point",
          "Description": "Durch Koordinaten erstellter Punkt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Legt einen Punkt nach Angabe dreier kartesischer Koordinaten fest.\n\nPoint.ByCoordinates (x: double = 0, y: double = 0, z: double = 0): Point"
    },
    {
      "ConcreteType": "CoreNodeModels.Input.DoubleSlider, CoreNodeModels",
      "NodeType": "NumberInputNode",
      "NumberType": "Double",
      "MaximumValue": 10.0,
      "MinimumValue": 2.0,
      "StepValue": 0.1,
      "InputValue": 8.0,
      "Id": "809d90299f4e49c2ad1ff5b5f13fbbd4",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "a249e546f27d403d9dc4904b9d61e396",
          "Name": "",
          "Description": "Double",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ein Schieberegler zur Erzeugung numerischer Werte"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.NurbsCurve.ByPoints@Autodesk.DesignScript.Geometry.Point[],int",
      "Id": "acf630999bac4d0393cd8cac77a1fe24",
      "Inputs": [
        {
          "Id": "c938dfe535284b7187eb9a7c65230859",
          "Name": "points",
          "Description": "Punkte für NURBS-Kurve\n\nPoint[]",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "49418a92f67d4dbfb38618369abe4b2f",
          "Name": "degree",
          "Description": "int\nVorgabewert : 3",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "111c11673b3e4d0ab8c4615077c69575",
          "Name": "NurbsCurve",
          "Description": "Aus Punkten erstellte NURBS-Kurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine BSplineCurve durch Interpolation zwischen Punkten.\n\nNurbsCurve.ByPoints (points: Point[], degree: int = 3): NurbsCurve"
    },
    {
      "ConcreteType": "CoreNodeModels.CreateList, CoreNodeModels",
      "VariableInputPorts": true,
      "NodeType": "ExtensionNode",
      "Id": "d7363aa8ff7744b4be2a42883a31b098",
      "Inputs": [
        {
          "Id": "35be28783fed429ab347dfa7c3dc20e1",
          "Name": "item0",
          "Description": "Elementindex #0",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "1a1c1a079a1649f6bdfc32d4579cd39e",
          "Name": "item1",
          "Description": "Elementindex #1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "7e09e3e47ae44ed18837ae3219c88849",
          "Name": "item2",
          "Description": "Elementindex #2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "bb3c99c1eba84972a3fb02a0ba09475e",
          "Name": "item3",
          "Description": "Elementindex #3",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "35533e927d0e47a29885d8fdf9b743da",
          "Name": "item4",
          "Description": "Elementindex #4",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "7e3d26355a1040de88936ee37ac78933",
          "Name": "list",
          "Description": "Eine Liste (type: var[]..[])",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Erstellt eine neue Liste aus den angegebenen Eingaben."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Point.ByCoordinates@double,double,double",
      "Id": "ee9e90b58afb4ed68867eebe0c738572",
      "Inputs": [
        {
          "Id": "d43f15a8f2124f709d9ec5c69260d8c1",
          "Name": "x",
          "Description": "X-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "426b781fc1e14bc0a27ae2265d0817a3",
          "Name": "y",
          "Description": "Y-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "4c39994e58824bb389d7bcda1e438826",
          "Name": "z",
          "Description": "Z-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "8f572281b9d44d9bb61531cea83f6297",
          "Name": "Point",
          "Description": "Durch Koordinaten erstellter Punkt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Legt einen Punkt nach Angabe dreier kartesischer Koordinaten fest.\n\nPoint.ByCoordinates (x: double = 0, y: double = 0, z: double = 0): Point"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "1;",
      "Id": "0496295051e647c18c8842659bc368a2",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "61fc316b43054ac4aa495cc4cea5d5fc",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Geometry.Translate@double,double,double",
      "Id": "996816fe85774fd1be72868ebb70f536",
      "Inputs": [
        {
          "Id": "2e63a592f55c4f89942781fbfb75751a",
          "Name": "geometry",
          "Description": "Autodesk.DesignScript.Geometry.Geometry",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "5b568a1bf28744e0b7c98b9b925dc375",
          "Name": "xTranslation",
          "Description": "Verschiebung entlang der X-Achse\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c36b52dfbedd4e0aa5b99b0d0cfd81a7",
          "Name": "yTranslation",
          "Description": "Verschiebung entlang der Y-Achse\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c13dad5029734060a155d5649fecc61b",
          "Name": "zTranslation",
          "Description": "Verschiebung entlang der Z-Achse\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "5b97d3f662844e40b3900c4959dc8bb1",
          "Name": "Geometry",
          "Description": "Transformierte Geometrie",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Verschiebt beliebige gegebene Geometrie um die angegebenen Werte in X-, Y- und und Z-Richtung wie im WKS definiert.\n\nGeometry.Translate (xTranslation: double = 0, yTranslation: double = 0, zTranslation: double = 0): Geometry"
    },
    {
      "ConcreteType": "CoreNodeModels.Sequence, CoreNodeModels",
      "NodeType": "ExtensionNode",
      "Id": "8f7784ac3d144ea2bfa857a47523e33a",
      "Inputs": [
        {
          "Id": "47d0fd6c33a045e190bcceab0c655a46",
          "Name": "start",
          "Description": "Startzahl oder -buchstabe für die Folge\r\nVorgabewert: 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "0a30c03f87b34346bd413f594d410b6d",
          "Name": "amount",
          "Description": "Anzahl der Zahlen oder Buchstaben in der Folge\r\nVorgabewert: 10",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "2f2894d8311a49d6b1dc6e87ec6871b4",
          "Name": "step",
          "Description": "Abstand zwischen Zahlen oder Buchstaben\r\nVorgabewert: 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "118efea55219446a827f993186977ab0",
          "Name": "list",
          "Description": "Neue Liste von type: var[]..[]",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine Folge von Zahlen."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.PolyCurve.ByThickeningCurveNormal@Autodesk.DesignScript.Geometry.Curve,double,Autodesk.DesignScript.Geometry.Vector",
      "Id": "c71353aedad24aabb1f6bf890f09090f",
      "Inputs": [
        {
          "Id": "8d1aff491e6e4ad097fc8576d7db91e7",
          "Name": "curve",
          "Description": "zu verdickende Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "70ea3eb20bc14dbd8b82dcd742cf7a7f",
          "Name": "thickness",
          "Description": "Dicke\n\ndouble",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "e8d08eaa464645aeb472eff2edf37666",
          "Name": "normal",
          "Description": "Normale senkrecht zur Verdickungsrichtung. Wenn die Normale nicht angegeben wird (Null ist), wird vorgabemäßig die Kurvennormale verwendet.\n\nVector\nVorgabewert : null",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "ffb224a7b6d24f2898b5f0244240d19d",
          "Name": "PolyCurve",
          "Description": "PolyCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine PolyCurve durch Verdicken einer Kurve entlang einer Ebene, die durch die eingegebene Normale angegeben wird.\n\nPolyCurve.ByThickeningCurveNormal (curve: Curve, thickness: double, normal: Vector = null): PolyCurve"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.1;",
      "Id": "7423726ffea1448fac96d11581afb080",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "74a23918bff54e3f922f02ee67313b77",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Vector.XAxis",
      "Id": "796bfeaebf214658be765be4ccdc8afd",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "3d71a2a718a444258d0d4b4835c58531",
          "Name": "Vector",
          "Description": "Vector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Ruft den kanonischen Vektor der X-Achse ab (1,0,0)\n\nVector.XAxis ( ): Vector"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Surface.ByPatch@Autodesk.DesignScript.Geometry.Curve",
      "Id": "4bc35962ea804f77ad81690fd553cfcb",
      "Inputs": [
        {
          "Id": "aedd9a6ae1504d0f9fc365f2c6aef504",
          "Name": "closedCurve",
          "Description": "Als Oberflächenbegrenzung verwendete geschlossene Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "2fb06dd7e5dd4614b489a455a1785598",
          "Name": "Surface",
          "Description": "Durch Füllung erstellte Oberfläche",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine Oberfläche durch Ausfüllen des Bereichs innerhalb einer durch die eingegebenen Kurven definierten geschlossenen Begrenzung.\n\nSurface.ByPatch (closedCurve: Curve): Surface"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Surface.Thicken@double",
      "Id": "6e578e127a38408d9019182452be4bf4",
      "Inputs": [
        {
          "Id": "da6cd48b0cbf4c7ebf2c443ee3c51ba3",
          "Name": "surface",
          "Description": "Autodesk.DesignScript.Geometry.Surface",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "89ca08e9b7c64b0bbafad2ec9aa422a7",
          "Name": "thickness",
          "Description": "Angegebene Verdickung\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "8bb582bee6ea4ac18445a543099afaf9",
          "Name": "Solid",
          "Description": "Verdickte Oberfläche als Volumenkörper",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Wandelt eine Oberfläche durch Extrusion in Richtung ihrer Normalen auf beiden Seiten in einen Volumenkörper um.\n\nSurface.Thicken (thickness: double = 1): Solid"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.5;",
      "Id": "ff358cbb1cef49d59c41c144ce2dbe27",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "042cb31a29a24490b5fb7595ef043cd2",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Line.ByStartPointDirectionLength@Autodesk.DesignScript.Geometry.Point,Autodesk.DesignScript.Geometry.Vector,double",
      "Id": "7966e23ec6104a528b011bc6d29e7af7",
      "Inputs": [
        {
          "Id": "6f581fa7e51d47fd8a2665902cc13260",
          "Name": "startPoint",
          "Description": "Linienanfangspunkt\n\nPoint",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "7dbf8b993393422cbe3f624869f35bb5",
          "Name": "direction",
          "Description": "Richtungsvektor\n\nVector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "67b6007f002343ba9ba41b17b25fd84f",
          "Name": "length",
          "Description": "Länge der Linie\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "7c7101dafff9451bb33b288b9593ea3a",
          "Name": "Line",
          "Description": "Linie von Anfangsrichtung und -länge",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine gerade Linie mit der angegebenen Länge vom Startpunkt ausgehend in Vektorrichtung.\n\nLine.ByStartPointDirectionLength (startPoint: Point, direction: Vector, length: double = 1): Line"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Vector.XAxis",
      "Id": "76e4127e4ec941139737746252cd219f",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "bb71071423d94ac78fc8c7def0dc947d",
          "Name": "Vector",
          "Description": "Vector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Ruft den kanonischen Vektor der X-Achse ab (1,0,0)\n\nVector.XAxis ( ): Vector"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.PolyCurve.ByThickeningCurveNormal@Autodesk.DesignScript.Geometry.Curve,double,Autodesk.DesignScript.Geometry.Vector",
      "Id": "d54989e65a734e5f85d7d7101356b092",
      "Inputs": [
        {
          "Id": "dc82104113064561821ad728811b931e",
          "Name": "curve",
          "Description": "zu verdickende Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b0770e39c3e44986af567c74af322f09",
          "Name": "thickness",
          "Description": "Dicke\n\ndouble",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "474f72fafc39414990546d82108173f4",
          "Name": "normal",
          "Description": "Normale senkrecht zur Verdickungsrichtung. Wenn die Normale nicht angegeben wird (Null ist), wird vorgabemäßig die Kurvennormale verwendet.\n\nVector\nVorgabewert : null",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "b8f5bb6df9fe47719784a6cfffa01bb7",
          "Name": "PolyCurve",
          "Description": "PolyCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine PolyCurve durch Verdicken einer Kurve entlang einer Ebene, die durch die eingegebene Normale angegeben wird.\n\nPolyCurve.ByThickeningCurveNormal (curve: Curve, thickness: double, normal: Vector = null): PolyCurve"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.3;",
      "Id": "d7da67a0851643c3bb55701b55cfb3e8",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "d9d45518f49d48f8a032d3608918f883",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Vector.ZAxis",
      "Id": "2ed91c93aac24f0c830744f12a33801e",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "bf813985b46e48caaa63a11ea3b3fde2",
          "Name": "Vector",
          "Description": "Vector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Ruft den kanonischen Vektor der Z-Achse ab (0,0,1)\n\nVector.ZAxis ( ): Vector"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Point.ByCoordinates@double,double,double",
      "Id": "85fced6fa6e447939efbd3333a237a87",
      "Inputs": [
        {
          "Id": "5c2717edbed54dbe991459c0e138f410",
          "Name": "x",
          "Description": "X-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "f5e56e1f8fda44c6ba07cf5fa41016a7",
          "Name": "y",
          "Description": "Y-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b6b8be287896485ebeaf1016846e110e",
          "Name": "z",
          "Description": "Z-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "9b265ef839ce41cb84add494aaf0fcdd",
          "Name": "Point",
          "Description": "Durch Koordinaten erstellter Punkt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Legt einen Punkt nach Angabe dreier kartesischer Koordinaten fest.\n\nPoint.ByCoordinates (x: double = 0, y: double = 0, z: double = 0): Point"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Curve.PlaneAtParameter@double",
      "Id": "4b97051b3ff94c72bfc7cfab3649484c",
      "Inputs": [
        {
          "Id": "bb15faa607ff41f2b540acad80aa644b",
          "Name": "curve",
          "Description": "Autodesk.DesignScript.Geometry.Curve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "819cc3733fdb492a8bee9ee0945b6e8a",
          "Name": "param",
          "Description": "double\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "f330347e6d684a6c9b3e880b8afe3bc2",
          "Name": "Plane",
          "Description": "Plane",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Gibt eine Ebene zurück, deren Normale an der Tangente der Kurve ausgerichtet ist. Parameter werden so angepasst, dass 0 immer der Anfangs- und 1 immer der Endpunkt ist.\n\nCurve.PlaneAtParameter (param: double = 0): Plane"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.5;",
      "Id": "65573b60bd3c4852981591cdd9680d5a",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "765fb561d8bf4c98a93010625c1fce20",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Rectangle.ByWidthLength@Autodesk.DesignScript.Geometry.Plane,double,double",
      "Id": "cfeaa9621c8a47f0a793390ca93737a5",
      "Inputs": [
        {
          "Id": "cdfc1ccac6b94a8a8153f6b0bfcab1f7",
          "Name": "plane",
          "Description": "Zum Zentrieren des Rechtecks verwendete Ebene\n\nPlane",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "6ab03b6fcf0b4b00997e07a18027b4e0",
          "Name": "width",
          "Description": "Breite des Rechtecks\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b6acc25b7aeb4b24b90be6d7ec8e0893",
          "Name": "length",
          "Description": "Länge des Rechtecks\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "cf5e3dd274f24f79b3cbc95154db1933",
          "Name": "Rectangle",
          "Description": "Durch Breite und Länge erstelltes Rechteck",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt ein Rectangle zentriert am Ursprung der eingegebenen Plane mit der eingegebenen Breite (X-Achse) und Länge (Y-Achse).\n\nRectangle.ByWidthLength (plane: Plane, width: double = 1, length: double = 1): Rectangle"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.4;",
      "Id": "97b9bc903b4a42cc8e9f69ebafca6149",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "d4ce24ef5ea247b3a4f9aef1d968b85f",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.4;",
      "Id": "e3edd2324b9846fa8de3289233d66280",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "60fca59d462444339548b59f5c9bf897",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Solid.BySweep@Autodesk.DesignScript.Geometry.Curve,Autodesk.DesignScript.Geometry.Curve,bool",
      "Id": "a5a8699817f945eca2466b1bf2810213",
      "Inputs": [
        {
          "Id": "7f3ab13280a7469c88d49853027d1713",
          "Name": "profile",
          "Description": "Geschlossene Kurve, die das Profil des Sweeps darstellt\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "d4f1b9df43384e4d907b9c18dde4ea96",
          "Name": "path",
          "Description": "Pfad, der den Sweep-Pfad darstellt\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "4f661a8298f44a41b99d903e7b7386c2",
          "Name": "cutEndOff",
          "Description": "Ende des Sweeps schneiden und lotrecht zum Pfad anordnen\n\nbool\nVorgabewert : false",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "d8715d0c912647609e3dd3d5e17454e5",
          "Name": "Solid",
          "Description": "Volumenkörper durch Sweep der Profilkurve an einem Pfad entlang",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Sweep einer geschlossenen Kurve an einem Pfad entlang.\n\nSolid.BySweep (profile: Curve, path: Curve, cutEndOff: bool = false): Solid"
    },
    {
      "ConcreteType": "CoreNodeModels.CreateList, CoreNodeModels",
      "VariableInputPorts": true,
      "NodeType": "ExtensionNode",
      "Id": "fa36078277474696aa9fe1eeafa88872",
      "Inputs": [
        {
          "Id": "209c25e5a7934a6690516b924533184d",
          "Name": "item0",
          "Description": "Elementindex #0",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "2c6b3756872a4592ad17fb7952fe6698",
          "Name": "item1",
          "Description": "Elementindex #1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "b5b7be6200274026b3c860719a67232b",
          "Name": "list",
          "Description": "Eine Liste (type: var[]..[])",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Erstellt eine neue Liste aus den angegebenen Eingaben."
    },
    {
      "ConcreteType": "CoreNodeModels.Input.DoubleSlider, CoreNodeModels",
      "NodeType": "NumberInputNode",
      "NumberType": "Double",
      "MaximumValue": 10.0,
      "MinimumValue": 1.0,
      "StepValue": 0.1,
      "InputValue": 5.0,
      "Id": "b23dfddb258b4d81be96c2e9fdd08c4d",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "79b5ae6366dd48cca7973b2b67ab69ca",
          "Name": "",
          "Description": "Double",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ein Schieberegler zur Erzeugung numerischer Werte"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "PergolaLengt / PerglaLengt;",
      "Id": "3f12c8da6aa84cefbb9ad35a3ad019b2",
      "Inputs": [
        {
          "Id": "efe7d75149cb46c1b6b95b0d2f05c5ae",
          "Name": "PergolaLengt",
          "Description": "PergolaLengt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "a01609d42d4344f984ae15f15ab9b68e",
          "Name": "PerglaLengt",
          "Description": "PerglaLengt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "afb80c15158f429991970bd1ffbc9042",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Point.ByCoordinates@double,double,double",
      "Id": "b0a89648ef19409fac6a8c490a152e35",
      "Inputs": [
        {
          "Id": "7e6e95e57ece46bdb07b32459ccb97d5",
          "Name": "x",
          "Description": "X-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "dfc8bda3d66c4555becf349b42b2e8a3",
          "Name": "y",
          "Description": "Y-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "79dd28e283dc4eefbf7cf28e8c2ede05",
          "Name": "z",
          "Description": "Z-Koordinate\n\ndouble\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "77cd57bbee6a4be9aa9da7ef7b9e13e4",
          "Name": "Point",
          "Description": "Durch Koordinaten erstellter Punkt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Legt einen Punkt nach Angabe dreier kartesischer Koordinaten fest.\n\nPoint.ByCoordinates (x: double = 0, y: double = 0, z: double = 0): Point"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Line.ByStartPointEndPoint@Autodesk.DesignScript.Geometry.Point,Autodesk.DesignScript.Geometry.Point",
      "Id": "a22cfb19925340cca64a358609093df1",
      "Inputs": [
        {
          "Id": "39da61cf88ab41c5bf128a8be2a192cb",
          "Name": "startPoint",
          "Description": "Linienanfangspunkt\n\nPoint",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "369bf3c8f00e4cfe87df9e4472dd8ec7",
          "Name": "endPoint",
          "Description": "Linienendpunkt\n\nPoint",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "ac27d8add76c4bcc97b77114ea727709",
          "Name": "Line",
          "Description": "Linie von Anfangs- und Endpunkt",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine gerade Linie zwischen zwei eingegebenen Punkten.\n\nLine.ByStartPointEndPoint (startPoint: Point, endPoint: Point): Line"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.4;",
      "Id": "a176249b724a40bf849e7139e13a2a2d",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "f9c523b6dc5e471da20f461ad373098e",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.PolyCurve.ByThickeningCurveNormal@Autodesk.DesignScript.Geometry.Curve,double,Autodesk.DesignScript.Geometry.Vector",
      "Id": "09e51318bc0d40f39207958364c5758d",
      "Inputs": [
        {
          "Id": "ea2d1c8e97ad4600b14e0668b9b9db38",
          "Name": "curve",
          "Description": "zu verdickende Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b7207fbce45a4adeb25d1c9c42e0b8c0",
          "Name": "thickness",
          "Description": "Dicke\n\ndouble",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "376fcf670ff8420cafd01214b202c5c3",
          "Name": "normal",
          "Description": "Normale senkrecht zur Verdickungsrichtung. Wenn die Normale nicht angegeben wird (Null ist), wird vorgabemäßig die Kurvennormale verwendet.\n\nVector\nVorgabewert : null",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "f0894a2082894a4f9f10176a5660e252",
          "Name": "PolyCurve",
          "Description": "PolyCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine PolyCurve durch Verdicken einer Kurve entlang einer Ebene, die durch die eingegebene Normale angegeben wird.\n\nPolyCurve.ByThickeningCurveNormal (curve: Curve, thickness: double, normal: Vector = null): PolyCurve"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Surface.ByPatch@Autodesk.DesignScript.Geometry.Curve",
      "Id": "9ba4fcc636064c818e88b35a43b8c30f",
      "Inputs": [
        {
          "Id": "29d1bae2fe444e6580f13cac00a2796f",
          "Name": "closedCurve",
          "Description": "Als Oberflächenbegrenzung verwendete geschlossene Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "30feaf876ba040bdb31562cae437abe4",
          "Name": "Surface",
          "Description": "Durch Füllung erstellte Oberfläche",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine Oberfläche durch Ausfüllen des Bereichs innerhalb einer durch die eingegebenen Kurven definierten geschlossenen Begrenzung.\n\nSurface.ByPatch (closedCurve: Curve): Surface"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Surface.Thicken@double",
      "Id": "5c88bdf4098d495aa66a929682fe3f0a",
      "Inputs": [
        {
          "Id": "a5c345bd3f904f86ae87ec18762d9f16",
          "Name": "surface",
          "Description": "Autodesk.DesignScript.Geometry.Surface",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "fd284b01ece74dfd8d52dac2a48699bd",
          "Name": "thickness",
          "Description": "Angegebene Verdickung\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "31bcb322529c494da24c6db48a64267f",
          "Name": "Solid",
          "Description": "Verdickte Oberfläche als Volumenkörper",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Wandelt eine Oberfläche durch Extrusion in Richtung ihrer Normalen auf beiden Seiten in einen Volumenkörper um.\n\nSurface.Thicken (thickness: double = 1): Solid"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Geometry.Translate@Autodesk.DesignScript.Geometry.Vector,double",
      "Id": "717d502eb1d343b0896909c8099fb53a",
      "Inputs": [
        {
          "Id": "6fdc25856b804d2197d54f11ff0e3802",
          "Name": "geometry",
          "Description": "Autodesk.DesignScript.Geometry.Geometry",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c31f107d85cb4314a34d0af7d1334ca9",
          "Name": "direction",
          "Description": "Richtung der Verschiebung\n\nVector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "454686f6e4704790a31796973a3e6613",
          "Name": "distance",
          "Description": "Strecke der Verschiebung in der angegebenen Richtung\n\ndouble",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "c63d3f93d05e44b19643894f7cb40f5a",
          "Name": "Geometry",
          "Description": "Transformierte Geometrie.",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Verschiebt Geometrie beliebigen Typs um die angegebenen Entfernung in die angegebene Richtung.\n\nGeometry.Translate (direction: Vector, distance: double): Geometry"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Vector.XAxis",
      "Id": "0644a188e97c40d287b850ab6982d666",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "8b7bdcf651534828a5c4523449f2108f",
          "Name": "Vector",
          "Description": "Vector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Ruft den kanonischen Vektor der X-Achse ab (1,0,0)\n\nVector.XAxis ( ): Vector"
    },
    {
      "ConcreteType": "CoreNodeModels.Formula, CoreNodeModels",
      "Formula": "Per - 1;",
      "NodeType": "FormulaNode",
      "Id": "e9fb6fd724cd44518cac3e466dd6962c",
      "Inputs": [
        {
          "Id": "d2fd6e18e72144c79b580369ed6ff545",
          "Name": "per",
          "Description": "variable",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "c6c9a7198a1043ad9b59e04920019d25",
          "Name": "",
          "Description": "Ergebnis der Formel",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Wertet mathematische Formeln aus. Dabei wird NCalc: http://ncalc.codeplex.com/ verwendet."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.PolyCurve.ByThickeningCurveNormal@Autodesk.DesignScript.Geometry.Curve,double,Autodesk.DesignScript.Geometry.Vector",
      "Id": "9b752669db384716be7624331445403f",
      "Inputs": [
        {
          "Id": "6eec8f5242944552938fd55b82b92f99",
          "Name": "curve",
          "Description": "zu verdickende Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c137aa5b6fdf40a681453a55994a5abf",
          "Name": "thickness",
          "Description": "Dicke\n\ndouble",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "7fdf40ce60694600ae56d4a7e081125f",
          "Name": "normal",
          "Description": "Normale senkrecht zur Verdickungsrichtung. Wenn die Normale nicht angegeben wird (Null ist), wird vorgabemäßig die Kurvennormale verwendet.\n\nVector\nVorgabewert : null",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "26bc851c2652436cb918741b2d160b3c",
          "Name": "PolyCurve",
          "Description": "PolyCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine PolyCurve durch Verdicken einer Kurve entlang einer Ebene, die durch die eingegebene Normale angegeben wird.\n\nPolyCurve.ByThickeningCurveNormal (curve: Curve, thickness: double, normal: Vector = null): PolyCurve"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Surface.Thicken@double",
      "Id": "238941c0c8f34577bf0420a18b37e79b",
      "Inputs": [
        {
          "Id": "7e57ec0d41774b8a850a53f11cc5d045",
          "Name": "surface",
          "Description": "Autodesk.DesignScript.Geometry.Surface",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "66022dc7a7034bbf8a65f9ed9f1d3991",
          "Name": "thickness",
          "Description": "Angegebene Verdickung\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "e66cb355617b4d32beeaf74063b53edb",
          "Name": "Solid",
          "Description": "Verdickte Oberfläche als Volumenkörper",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Wandelt eine Oberfläche durch Extrusion in Richtung ihrer Normalen auf beiden Seiten in einen Volumenkörper um.\n\nSurface.Thicken (thickness: double = 1): Solid"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Surface.ByPatch@Autodesk.DesignScript.Geometry.Curve",
      "Id": "692c0368c5b841c2b36062a2c98279aa",
      "Inputs": [
        {
          "Id": "2fcb502763914e50a18bebcf7599998d",
          "Name": "closedCurve",
          "Description": "Als Oberflächenbegrenzung verwendete geschlossene Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "8fd47442c90b404abf319743bd5adba6",
          "Name": "Surface",
          "Description": "Durch Füllung erstellte Oberfläche",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine Oberfläche durch Ausfüllen des Bereichs innerhalb einer durch die eingegebenen Kurven definierten geschlossenen Begrenzung.\n\nSurface.ByPatch (closedCurve: Curve): Surface"
    },
    {
      "ConcreteType": "CoreNodeModels.Input.ColorPalette, CoreNodeModels",
      "InputValue": {
        "R": 107,
        "G": 142,
        "B": 35,
        "A": 255
      },
      "NodeType": "ColorInputNode",
      "Id": "382cbd07a95143bc8f13e9e04d2cd898",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "a2c241ff1681414dacdd69f7b5a8f214",
          "Name": "Color",
          "Description": "Selected Color.",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Wählen Sie eine Farbe aus der Palette."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Modifiers.GeometryColor.ByGeometryColor@Autodesk.DesignScript.Geometry.Geometry,DSCore.Color",
      "Id": "9e82fbdf18214be083bbc982c68891dc",
      "Inputs": [
        {
          "Id": "441bc11d3f9249478b189a71b3f61840",
          "Name": "geometry",
          "Description": "Die Geometrie, auf die Sie Farbe anwenden möchten.\n\nGeometry",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "9c4c5b87db1e44c4af516ee0e3dee45c",
          "Name": "color",
          "Description": "Die Farbe.\n\nColor",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "b2cb5ab5cd50479f99acc9861a0c606e",
          "Name": "GeometryColor",
          "Description": "Ein Anzeigeobjekt.",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Zeigt die Geometrie mithilfe einer Farbe an.\n\nGeometryColor.ByGeometryColor (geometry: Geometry, color: Color): GeometryColor"
    },
    {
      "ConcreteType": "CoreNodeModels.Input.DoubleSlider, CoreNodeModels",
      "NodeType": "NumberInputNode",
      "NumberType": "Double",
      "MaximumValue": 982242151716733.0,
      "MinimumValue": 1.0,
      "StepValue": 0.1,
      "InputValue": 15.0,
      "Id": "db486cca8f4c46cf89e3a97b23769b3e",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "3e210b91fd5948b6a183442c531fa09a",
          "Name": "",
          "Description": "Double",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ein Schieberegler zur Erzeugung numerischer Werte"
    },
    {
      "ConcreteType": "CoreNodeModels.CreateList, CoreNodeModels",
      "VariableInputPorts": true,
      "NodeType": "ExtensionNode",
      "Id": "99c7193b77d24f55b61e683d4ba9eaba",
      "Inputs": [
        {
          "Id": "9ea9f1cc1ba74416884ba67a1155d4ed",
          "Name": "item0",
          "Description": "Elementindex #0",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "d4b3fd187b5a4f8683a6e1f5c9a42b6c",
          "Name": "item1",
          "Description": "Elementindex #1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "0f49c5625c0d4044b56577ee6c1ee5ba",
          "Name": "item2",
          "Description": "Elementindex #2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "55f4f9eab9394e039936809b266c3325",
          "Name": "list",
          "Description": "Eine Liste (type: var[]..[])",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Erstellt eine neue Liste aus den angegebenen Eingaben."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Solid.BySweep@Autodesk.DesignScript.Geometry.Curve,Autodesk.DesignScript.Geometry.Curve,bool",
      "Id": "745b71cf044e488ea751835ce84f08c7",
      "Inputs": [
        {
          "Id": "0493561f1891400e8c1b78fcfd361cc0",
          "Name": "profile",
          "Description": "Geschlossene Kurve, die das Profil des Sweeps darstellt\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "32331a698bc9425dadf6120ce9564ef9",
          "Name": "path",
          "Description": "Pfad, der den Sweep-Pfad darstellt\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "79546ad117b041a0ab586045513b382f",
          "Name": "cutEndOff",
          "Description": "Ende des Sweeps schneiden und lotrecht zum Pfad anordnen\n\nbool\nVorgabewert : false",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "2b981915eeec431f8f8f05e0b016c27b",
          "Name": "Solid",
          "Description": "Volumenkörper durch Sweep der Profilkurve an einem Pfad entlang",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Sweep einer geschlossenen Kurve an einem Pfad entlang.\n\nSolid.BySweep (profile: Curve, path: Curve, cutEndOff: bool = false): Solid"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.15;",
      "Id": "e1787852e46c4251ae1a9ab49dc73091",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "f1dc5866f94b480e80361d60c2ddadae",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.15;",
      "Id": "61720e6c88cf474795d5a5a856804eee",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "46938d2af3e64f50be8a61c5fa78dc1f",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Rectangle.ByWidthLength@Autodesk.DesignScript.Geometry.Plane,double,double",
      "Id": "aead860adf7642d29437390060e64a9a",
      "Inputs": [
        {
          "Id": "013da65fbc264d13a1d72df891de14b3",
          "Name": "plane",
          "Description": "Zum Zentrieren des Rechtecks verwendete Ebene\n\nPlane",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "d45e632bd7324b1caf83b549e404e72b",
          "Name": "width",
          "Description": "Breite des Rechtecks\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b1d236d0363d41e49aa1e5251ab6e0be",
          "Name": "length",
          "Description": "Länge des Rechtecks\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "7e4d659a121c45518b4b14c41e5ba19d",
          "Name": "Rectangle",
          "Description": "Durch Breite und Länge erstelltes Rechteck",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt ein Rectangle zentriert am Ursprung der eingegebenen Plane mit der eingegebenen Breite (X-Achse) und Länge (Y-Achse).\n\nRectangle.ByWidthLength (plane: Plane, width: double = 1, length: double = 1): Rectangle"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.5;",
      "Id": "0031c7578fc949a5ba171c5f65973bd8",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "de3693e3650d4235a85b5a7d975a0142",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Curve.PlaneAtParameter@double",
      "Id": "d923244077fd4b46af2ba275ad28407d",
      "Inputs": [
        {
          "Id": "3253dc6c35914aa3ad0e2349967bdc2a",
          "Name": "curve",
          "Description": "Autodesk.DesignScript.Geometry.Curve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "a01e976dfc154a72bb25f11ee2eb1b06",
          "Name": "param",
          "Description": "double\nVorgabewert : 0",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "76c1ab9681e846fcad99274a7ab19d16",
          "Name": "Plane",
          "Description": "Plane",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Gibt eine Ebene zurück, deren Normale an der Tangente der Kurve ausgerichtet ist. Parameter werden so angepasst, dass 0 immer der Anfangs- und 1 immer der Endpunkt ist.\n\nCurve.PlaneAtParameter (param: double = 0): Plane"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Vector.ZAxis",
      "Id": "b4062776789c427984e7987d0781d4c0",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "15fb0b54f7fd4d16af580790184a2ff1",
          "Name": "Vector",
          "Description": "Vector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Ruft den kanonischen Vektor der Z-Achse ab (0,0,1)\n\nVector.ZAxis ( ): Vector"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.3;",
      "Id": "3234cb2a23d0491da47ea751a29a885c",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "3825370240a6434f828843f778eaa5a9",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.PolyCurve.ByThickeningCurveNormal@Autodesk.DesignScript.Geometry.Curve,double,Autodesk.DesignScript.Geometry.Vector",
      "Id": "46b9b31a4349420b8eee614066ad4c21",
      "Inputs": [
        {
          "Id": "836c86048b5b4abda075b15efd88a171",
          "Name": "curve",
          "Description": "zu verdickende Kurve\n\nCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "d049b42b123e4c5fa2440bb62cee6de4",
          "Name": "thickness",
          "Description": "Dicke\n\ndouble",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "6036c1796399443eb587c95b303d995d",
          "Name": "normal",
          "Description": "Normale senkrecht zur Verdickungsrichtung. Wenn die Normale nicht angegeben wird (Null ist), wird vorgabemäßig die Kurvennormale verwendet.\n\nVector\nVorgabewert : null",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "2859c3ee525340f487665acf62b0ccb3",
          "Name": "PolyCurve",
          "Description": "PolyCurve",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine PolyCurve durch Verdicken einer Kurve entlang einer Ebene, die durch die eingegebene Normale angegeben wird.\n\nPolyCurve.ByThickeningCurveNormal (curve: Curve, thickness: double, normal: Vector = null): PolyCurve"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Vector.XAxis",
      "Id": "07db20e4d1fb4fd6a1becdd2c7f25a3f",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "f5d2921a900b436ea23aa6e84b81ba1e",
          "Name": "Vector",
          "Description": "Vector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Ruft den kanonischen Vektor der X-Achse ab (1,0,0)\n\nVector.XAxis ( ): Vector"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "Autodesk.DesignScript.Geometry.Line.ByStartPointDirectionLength@Autodesk.DesignScript.Geometry.Point,Autodesk.DesignScript.Geometry.Vector,double",
      "Id": "b3b7c999d90947c6ad019a755e31a17b",
      "Inputs": [
        {
          "Id": "9d15bc8a5a9d481aac3055f49b8a8430",
          "Name": "startPoint",
          "Description": "Linienanfangspunkt\n\nPoint",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "5bfb8549272e4042ae79fd251e5b5245",
          "Name": "direction",
          "Description": "Richtungsvektor\n\nVector",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "73a43074e0ff4c06aeefd0af38085981",
          "Name": "length",
          "Description": "Länge der Linie\n\ndouble\nVorgabewert : 1",
          "UsingDefaultValue": true,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "10c3da60f8ed4c15a66ebcdd84a565a3",
          "Name": "Line",
          "Description": "Linie von Anfangsrichtung und -länge",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Erstellt eine gerade Linie mit der angegebenen Länge vom Startpunkt ausgehend in Vektorrichtung.\n\nLine.ByStartPointDirectionLength (startPoint: Point, direction: Vector, length: double = 1): Line"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "Widthh / 2;",
      "Id": "65cbae36322b4e1b9d66b7c8b5d2786c",
      "Inputs": [
        {
          "Id": "c4e7fe5f15814822b36805d4fa3fb19b",
          "Name": "Widthh",
          "Description": "Widthh",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "4f74b12d0ba0479a9f82a6fd1e3464e3",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "(Left + Right) / 2;",
      "Id": "c84dec3ccd964a68a5878ee6f0ccf1ad",
      "Inputs": [
        {
          "Id": "05f236604b4745dabc2e3eb7bb4600c2",
          "Name": "Left",
          "Description": "Left",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "a79ddb4cacd54c69a4622918bbb8dfc7",
          "Name": "Right",
          "Description": "Right",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "f87ad6bf8f1e499d9a05828ce23ce109",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "",
      "Id": "729ebb31f529400a9493992212031bdb",
      "Inputs": [],
      "Outputs": [],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.ZeroTouch.DSFunction, DynamoCore",
      "NodeType": "FunctionNode",
      "FunctionSignature": "-@var[]..[],var[]..[]",
      "Id": "51180bae44ce402ba779eb3aebafa02e",
      "Inputs": [
        {
          "Id": "7b42e810b7df443a8f9a868538b09ab9",
          "Name": "x",
          "Description": "Ganzzahl oder double-Wert\n\nvar[]..[]",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "67513bdc5e1f44e88d3d0418604ff53d",
          "Name": "y",
          "Description": "Ganzzahl oder double-Wert\n\nvar[]..[]",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "0aaf13e0360740b1b52042f240cc4362",
          "Name": "number",
          "Description": "Ergebnis der y-Eingabe subtrahiert von der x-Eingabe",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Auto",
      "Description": "Gibt die Subtraktion von x minus y zurück\n\n- (x: var[]..[], y: var[]..[]): var[]..[]"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "0.8;",
      "Id": "a7c406e7f32b40e98c1b1b5074673800",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "656a59263e4e4b9dafac952a1235dadc",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Rahmenprofil Riegel: IPE 100\nFläche = 6.27;\n// Rahmenprofil Stiel IPE 120\n// S235\nfy = 23.5;\n// Statiknachweise\n// Eigengewicht (in kN)\ngRiegel = 0.081;\ngStiel = 0.104 * Elevation;\n// Schneelastn in kN\ns = 0.34 * Weite;\n// Windlast in kN\nw = 7.5;",
      "Id": "c803d26424eb4da9b17c9b25c33b328f",
      "Inputs": [
        {
          "Id": "74aea83fb0864cef9f6783cb0b37df1f",
          "Name": "Elevation",
          "Description": "Elevation",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "d8b269f572534506a9ce4ca3e355b6fe",
          "Name": "Weite",
          "Description": "Weite",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "7764b49c75f04e3a990877edf4d86cea",
          "Name": "",
          "Description": "Fläche",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "675b497dac9f46d0b14e99c7265cc6f0",
          "Name": "",
          "Description": "fy",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "750bee0212f440b2b4917ff223499c87",
          "Name": "",
          "Description": "gRiegel",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "4997fcdab4ed47f495e8bf1f82f0f92f",
          "Name": "",
          "Description": "gStiel",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "d8596fdf1a3044d0ba2b4a96c7b48b5e",
          "Name": "",
          "Description": "s",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c1bf424a29f8438181f3d0bb14909b84",
          "Name": "",
          "Description": "w",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Zweiseitig eingespannter Rahmen\n\n//Eigengewicht\nA = (q * Weite) / 2;\nk = (Ir / Is) * (Elevation / Weite);\nH1 = (q * Weite * Weite) / (4 * Elevation * (k +2));\nH2 = H1;",
      "Id": "a80aeb34dfb44a09a65e13dcfa9c27a7",
      "Inputs": [
        {
          "Id": "5fac73a2ed464508b3b2cc99212398fb",
          "Name": "q",
          "Description": "q",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b51b44a4c35a4e60817c5621c4b89e5d",
          "Name": "Weite",
          "Description": "Weite",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "96a52d07f1b048cabafc13de0ad9613f",
          "Name": "Ir",
          "Description": "Ir",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "e0a20e08d28242d0bfe594325cd42620",
          "Name": "Is",
          "Description": "Is",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "2339d969bde7486fb15d5d4f434b725e",
          "Name": "Elevation",
          "Description": "Elevation",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "b8d424a378f0414e9041b85bc4a816be",
          "Name": "",
          "Description": "A",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "2ac1a1b84cc147a5a11826f83443961a",
          "Name": "",
          "Description": "k",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c901b38825f249a991ee64e2b6318bd2",
          "Name": "",
          "Description": "H1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "4b87a7e17ebf4859876730fc8a2fbc90",
          "Name": "",
          "Description": "H2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Schneelast\nA = (q * Weite) / 2;\nk = (Ir / Is) * (Elevation / Weite);\nH1 = (q * Weite * Weite) / (4 * Elevation * (k +2));\nH2 = H1;",
      "Id": "9e81f8f1285f40e387069533ed399150",
      "Inputs": [
        {
          "Id": "445413f0563b49c4aef5fcd6518d6110",
          "Name": "q",
          "Description": "q",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "1123f7d75e5548759cdbdb05fa66429b",
          "Name": "Weite",
          "Description": "Weite",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "d1769de15c1749a3a8b118114dc80903",
          "Name": "Ir",
          "Description": "Ir",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "a965bea05fdb47e0b374a5e2835a8512",
          "Name": "Is",
          "Description": "Is",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c9bddac64c934ba2aa787c78c58dd30b",
          "Name": "Elevation",
          "Description": "Elevation",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "0fd9244cbd47424492730aee1407edf0",
          "Name": "",
          "Description": "A",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "37834e0ea8e34a01b74bf10394fa6d9a",
          "Name": "",
          "Description": "k",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "4d953d1bde684dd58f4e06256a5d0af2",
          "Name": "",
          "Description": "H1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "190a642c37fa41439919c9c4228613b7",
          "Name": "",
          "Description": "H2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Windlast angenommen als Einzelkraft oben am Stiel angreifend\n\nA = (( F * Elevation) / Weite) / ((3 * k) / (6*k +1));\nB = -A;\nH1 = F / 2;\nH2= -H1;",
      "Id": "084b29a848114f2caf9cdd895c2e4c90",
      "Inputs": [
        {
          "Id": "48d458dbd565426fa5cb118fa3affd03",
          "Name": "F",
          "Description": "F",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "526246e7a29e40fdada99e4f265e13d7",
          "Name": "Elevation",
          "Description": "Elevation",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "113d107d6b2f487789f238c81d473058",
          "Name": "Weite",
          "Description": "Weite",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "a0b3e17e92d048c1af5bd9b445ea6fd8",
          "Name": "k",
          "Description": "k",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "c2fc5c58a0f54bdba0517ea6e661e3e5",
          "Name": "",
          "Description": "A",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "fff6a60fc89743d19439e675c6299cf5",
          "Name": "",
          "Description": "B",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "a2eaffbc65794f9cae376b5205659e03",
          "Name": "",
          "Description": "H1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "e9e892c7832d43fe804f0af46d104050",
          "Name": "",
          "Description": "H2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Berechnung nach Schneider Bautabellen\nN1 = - A1;\nN2 = -A2;\nN3= -A3;",
      "Id": "c5b0e06937f147c3ae290d0a63e292b5",
      "Inputs": [
        {
          "Id": "f73f5f7a88cd4cd1b49a549a435a1063",
          "Name": "A1",
          "Description": "A1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "b421fa3f58dd49c0b9eab23190a2b2f4",
          "Name": "A2",
          "Description": "A2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "e56c0f3546ed47efa1e3772f5e3c5983",
          "Name": "A3",
          "Description": "A3",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "a04afa5db0224c16b27e939378174d22",
          "Name": "",
          "Description": "N1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "aab503dd89a54232a802523aafdf429b",
          "Name": "",
          "Description": "N2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "1b943c254b49463ca4dea2a524548351",
          "Name": "",
          "Description": "N3",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Berechnung nach Schneider Bautabellen\nQ1 = (gRiegel * Weite) / 2;\nQ2 = (s * Weite) / 2;\nQ3 = F / 2;",
      "Id": "e63da51fceb74757b9ac2eb8d67ec2d1",
      "Inputs": [
        {
          "Id": "8bc3be1ba3334918b1603da7617c25e5",
          "Name": "gRiegel",
          "Description": "gRiegel",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "120880f709174903ab0ee4664313ddbe",
          "Name": "Weite",
          "Description": "Weite",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "f5a889f02f124f2ca74741b195aa0651",
          "Name": "s",
          "Description": "s",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "e6a1e329c4fb4ec6a2cfcec4853c3f59",
          "Name": "F",
          "Description": "F",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "1799a556368943ea88b9be2dc75010b2",
          "Name": "",
          "Description": "Q1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "c389043c115e49ec81fc6e7ae6aed97f",
          "Name": "",
          "Description": "Q2",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "94e7f3f63f7a4b16b32adef8076e537d",
          "Name": "",
          "Description": "Q3",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Wert aus Schneider Bautabellen\nIr = 171;",
      "Id": "f1b861dcf4114f9c83ab83ac63ecd082",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "f091f5a965ae4e20b369f046afa98f09",
          "Name": "",
          "Description": "Ir",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Wert aus Schneider Bautabellen\nIs = 318;",
      "Id": "8c87fa6dc0c940069583e27181bcb7d9",
      "Inputs": [],
      "Outputs": [
        {
          "Id": "70dff9ed8a3541549c4562290325584f",
          "Name": "",
          "Description": "Is",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "CoreNodeModels.Watch, CoreNodeModels",
      "NodeType": "ExtensionNode",
      "Id": "5cea27851ac845fdb30e0c9b2d3028a5",
      "Inputs": [
        {
          "Id": "42e5fa656b29445eb3fa98dec41ebf38",
          "Name": "",
          "Description": "Block, dessen Ausgabe angezeigt wird",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "d09b9ce03d624dbd93fac92b0540049f",
          "Name": "",
          "Description": "Blockausgabe",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Visualisierung der Ausgabe des Blocks"
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "// Normalspannungsnachweis\n\nSigmaEd = (MaxN / FlächeRiegel);\nSigmaRd = fy;\n\n// Schubspannungsnachweis\n\nTauEd = (MaxQ / FlächeRiegel);\nTauRd = (235 / 1.73205080757 * 1.0);",
      "Id": "b77a6e5b1f1c493cae263f2b84fdb987",
      "Inputs": [
        {
          "Id": "a1ceede13b424bf5b063e624ce4fa71a",
          "Name": "MaxN",
          "Description": "MaxN",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "bd8e889f49d94f2e9a7bb0c947caffde",
          "Name": "FlächeRiegel",
          "Description": "FlächeRiegel",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "37865aa978904fc9988623986cfa229f",
          "Name": "fy",
          "Description": "fy",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "adb00369947a4134b52c1f1c914610b9",
          "Name": "MaxQ",
          "Description": "MaxQ",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "8555e81c11264ccd811b7647d9971c46",
          "Name": "",
          "Description": "SigmaEd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "bfc8f26a99be40ca95f8539fc5abd0b9",
          "Name": "",
          "Description": "SigmaRd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "fd72e34726744fb8b2a987c602e7ea71",
          "Name": "",
          "Description": "TauEd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "06c50036ca544b4083db4a1aba44e75b",
          "Name": "",
          "Description": "TauRd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "SigmaEd / SigmaRd < 1.0;",
      "Id": "3e395ac6d3a04b6e80bbc777acc74b45",
      "Inputs": [
        {
          "Id": "fbfe991d245b4bb887289d1644efbb04",
          "Name": "SigmaEd",
          "Description": "SigmaEd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "87c939634e924429bb471561ef6aeeeb",
          "Name": "SigmaRd",
          "Description": "SigmaRd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "dccb848c4e6f437ba398eb05b4242ebc",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "Dynamo.Graph.Nodes.CodeBlockNodeModel, DynamoCore",
      "NodeType": "CodeBlockNode",
      "Code": "TauEd / TauRd < 1.0;",
      "Id": "71ec84abff26453f99fc048ccdcac0f2",
      "Inputs": [
        {
          "Id": "85b2fe7b0e284c8cb2d03becc41f99aa",
          "Name": "TauEd",
          "Description": "TauEd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        },
        {
          "Id": "79746a27312c46c2899efe3f99eb13a7",
          "Name": "TauRd",
          "Description": "TauRd",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "60ff7eea4281441189cc74f33902574e",
          "Name": "",
          "Description": "Wert des Ausdrucks in Zeile 1",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Ermöglicht die direkte Erstellung von DesignScript-Code."
    },
    {
      "ConcreteType": "CoreNodeModels.Watch, CoreNodeModels",
      "NodeType": "ExtensionNode",
      "Id": "70caf6658c9d4649a12b8b165c36dbc3",
      "Inputs": [
        {
          "Id": "6ce608ad3d3b4af99cb9729ea1596e40",
          "Name": "",
          "Description": "Block, dessen Ausgabe angezeigt wird",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Outputs": [
        {
          "Id": "44957d34199649a18b6e9682e3dffc8f",
          "Name": "",
          "Description": "Blockausgabe",
          "UsingDefaultValue": false,
          "Level": 2,
          "UseLevels": false,
          "KeepListStructure": false
        }
      ],
      "Replication": "Disabled",
      "Description": "Visualisierung der Ausgabe des Blocks"
    }
  ],
  "Connectors": [
    {
      "Start": "13447d92bd084886864be1e860b5d78a",
      "End": "1a1c1a079a1649f6bdfc32d4579cd39e",
      "Id": "d72c9bf709b6441fa4d0fe2af25bbc6b",
      "IsHidden": "False"
    },
    {
      "Start": "13447d92bd084886864be1e860b5d78a",
      "End": "9ea9f1cc1ba74416884ba67a1155d4ed",
      "Id": "2771de6f61e44af78d6e98af33281dab",
      "IsHidden": "False"
    },
    {
      "Start": "fd6aa4c5a0144a8fba28eaa64bdd8ac2",
      "End": "35be28783fed429ab347dfa7c3dc20e1",
      "Id": "e79f00f21ddb4ee5b1536b4e27c297cd",
      "IsHidden": "False"
    },
    {
      "Start": "fd6aa4c5a0144a8fba28eaa64bdd8ac2",
      "End": "2c6b3756872a4592ad17fb7952fe6698",
      "Id": "1bf69004feff44ccbc7431813ea1664b",
      "IsHidden": "False"
    },
    {
      "Start": "e93d8594657f48e59be8dc598f989b01",
      "End": "96814e2fa4f24a299b6d3d6ed0f66981",
      "Id": "5b2b283061204d0181865a8dedab3d0d",
      "IsHidden": "False"
    },
    {
      "Start": "e93d8594657f48e59be8dc598f989b01",
      "End": "05f236604b4745dabc2e3eb7bb4600c2",
      "Id": "37729fa5366e45a0b821fdaff7a3ab5a",
      "IsHidden": "False"
    },
    {
      "Start": "beb27e90f549428e8840a841b69405b9",
      "End": "35533e927d0e47a29885d8fdf9b743da",
      "Id": "92e1c397f39244059bad74555975ced4",
      "IsHidden": "False"
    },
    {
      "Start": "beb27e90f549428e8840a841b69405b9",
      "End": "209c25e5a7934a6690516b924533184d",
      "Id": "06b1563adcd84106a9f5d5d1e5fbe9e6",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "3fd92d07da3748c298b9425e81356ae3",
      "Id": "0540db3d32d94142a2a7ae50b1d7d09f",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "09341a21d6d54b26905bafc14aa20c0f",
      "Id": "c2576dc62597480c829bf205a09e4813",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "120880f709174903ab0ee4664313ddbe",
      "Id": "bd7cc76248a048ee9aab547151bd241e",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "113d107d6b2f487789f238c81d473058",
      "Id": "396ae9458eb04089a7ff7f8b9bfefc80",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "1123f7d75e5548759cdbdb05fa66429b",
      "Id": "0c529b9141de461f8177352938297ba6",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "b51b44a4c35a4e60817c5621c4b89e5d",
      "Id": "e43fea72315248dea409bb5a175d29ed",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "c4e7fe5f15814822b36805d4fa3fb19b",
      "Id": "a37aff4d75954d948761a79f4f2e2d5b",
      "IsHidden": "False"
    },
    {
      "Start": "a249e546f27d403d9dc4904b9d61e396",
      "End": "d8b269f572534506a9ce4ca3e355b6fe",
      "Id": "4321f38e77f244aebe15fd1f5c9809ac",
      "IsHidden": "False"
    },
    {
      "Start": "111c11673b3e4d0ab8c4615077c69575",
      "End": "2e63a592f55c4f89942781fbfb75751a",
      "Id": "ee78b6ec7e5c426b96bde85e65ee8673",
      "IsHidden": "False"
    },
    {
      "Start": "7e3d26355a1040de88936ee37ac78933",
      "End": "c938dfe535284b7187eb9a7c65230859",
      "Id": "016f988d6c034e5789c9c438a16bf7f8",
      "IsHidden": "False"
    },
    {
      "Start": "8f572281b9d44d9bb61531cea83f6297",
      "End": "bb3c99c1eba84972a3fb02a0ba09475e",
      "Id": "5b02b150a94347e1b0cca40a4768a4e8",
      "IsHidden": "False"
    },
    {
      "Start": "8f572281b9d44d9bb61531cea83f6297",
      "End": "d4b3fd187b5a4f8683a6e1f5c9a42b6c",
      "Id": "abe4250352a047eab78ff3d31115e239",
      "IsHidden": "False"
    },
    {
      "Start": "61fc316b43054ac4aa495cc4cea5d5fc",
      "End": "49418a92f67d4dbfb38618369abe4b2f",
      "Id": "53e3414b0e6941ec859756d5604fc302",
      "IsHidden": "False"
    },
    {
      "Start": "5b97d3f662844e40b3900c4959dc8bb1",
      "End": "8d1aff491e6e4ad097fc8576d7db91e7",
      "Id": "a48c733acd814815889e9a03a233f50f",
      "IsHidden": "False"
    },
    {
      "Start": "118efea55219446a827f993186977ab0",
      "End": "5b568a1bf28744e0b7c98b9b925dc375",
      "Id": "82d27abe8d22413ebae01429fa3536ab",
      "IsHidden": "False"
    },
    {
      "Start": "ffb224a7b6d24f2898b5f0244240d19d",
      "End": "aedd9a6ae1504d0f9fc365f2c6aef504",
      "Id": "dad4c8767611487cbf64a35c9c08bdff",
      "IsHidden": "False"
    },
    {
      "Start": "74a23918bff54e3f922f02ee67313b77",
      "End": "70ea3eb20bc14dbd8b82dcd742cf7a7f",
      "Id": "5d1af8c9e53943f2ab9079dd56accf9b",
      "IsHidden": "False"
    },
    {
      "Start": "3d71a2a718a444258d0d4b4835c58531",
      "End": "e8d08eaa464645aeb472eff2edf37666",
      "Id": "b61264c17cce47fe95c7d3a28b175f69",
      "IsHidden": "False"
    },
    {
      "Start": "2fb06dd7e5dd4614b489a455a1785598",
      "End": "da6cd48b0cbf4c7ebf2c443ee3c51ba3",
      "Id": "24a3c5ff47d54ed89ff0606fb969a839",
      "IsHidden": "False"
    },
    {
      "Start": "8bb582bee6ea4ac18445a543099afaf9",
      "End": "441bc11d3f9249478b189a71b3f61840",
      "Id": "c1754dde92804432ab257454cd9aa0e3",
      "IsHidden": "False"
    },
    {
      "Start": "042cb31a29a24490b5fb7595ef043cd2",
      "End": "89ca08e9b7c64b0bbafad2ec9aa422a7",
      "Id": "5327e6b83b544fd4aa3ca2c1b6ea692a",
      "IsHidden": "False"
    },
    {
      "Start": "7c7101dafff9451bb33b288b9593ea3a",
      "End": "dc82104113064561821ad728811b931e",
      "Id": "4b769f4c69ef42b2bfaa6df20de8035e",
      "IsHidden": "False"
    },
    {
      "Start": "bb71071423d94ac78fc8c7def0dc947d",
      "End": "7dbf8b993393422cbe3f624869f35bb5",
      "Id": "4888d5af104648ac811ac84d60bcf056",
      "IsHidden": "False"
    },
    {
      "Start": "b8f5bb6df9fe47719784a6cfffa01bb7",
      "End": "d4f1b9df43384e4d907b9c18dde4ea96",
      "Id": "7f651cef3ef9449c977c3e7df2983dcc",
      "IsHidden": "False"
    },
    {
      "Start": "b8f5bb6df9fe47719784a6cfffa01bb7",
      "End": "bb15faa607ff41f2b540acad80aa644b",
      "Id": "786acc3ab5a646ff85d8ddabcbebac20",
      "IsHidden": "False"
    },
    {
      "Start": "d9d45518f49d48f8a032d3608918f883",
      "End": "b0770e39c3e44986af567c74af322f09",
      "Id": "88e73274f09643838fce9a1d38c78450",
      "IsHidden": "False"
    },
    {
      "Start": "bf813985b46e48caaa63a11ea3b3fde2",
      "End": "474f72fafc39414990546d82108173f4",
      "Id": "267fe6990a754445988b96f5ff12fc8d",
      "IsHidden": "False"
    },
    {
      "Start": "9b265ef839ce41cb84add494aaf0fcdd",
      "End": "7e09e3e47ae44ed18837ae3219c88849",
      "Id": "c1aa6f1a56b041b8a70f5e1562fae05d",
      "IsHidden": "False"
    },
    {
      "Start": "9b265ef839ce41cb84add494aaf0fcdd",
      "End": "369bf3c8f00e4cfe87df9e4472dd8ec7",
      "Id": "9a6b130af25547d386e821eef841118a",
      "IsHidden": "False"
    },
    {
      "Start": "9b265ef839ce41cb84add494aaf0fcdd",
      "End": "0f49c5625c0d4044b56577ee6c1ee5ba",
      "Id": "e13a31acae8f4f8598d996a7116e4e13",
      "IsHidden": "False"
    },
    {
      "Start": "f330347e6d684a6c9b3e880b8afe3bc2",
      "End": "cdfc1ccac6b94a8a8153f6b0bfcab1f7",
      "Id": "f8bba2e0c6014fc5b29c6b2630a24dde",
      "IsHidden": "False"
    },
    {
      "Start": "765fb561d8bf4c98a93010625c1fce20",
      "End": "819cc3733fdb492a8bee9ee0945b6e8a",
      "Id": "65af488da23948819cb0810eeff08e58",
      "IsHidden": "False"
    },
    {
      "Start": "cf5e3dd274f24f79b3cbc95154db1933",
      "End": "7f3ab13280a7469c88d49853027d1713",
      "Id": "8094fbf9f0a04444ae468c1ff3fce0f5",
      "IsHidden": "False"
    },
    {
      "Start": "d4ce24ef5ea247b3a4f9aef1d968b85f",
      "End": "6ab03b6fcf0b4b00997e07a18027b4e0",
      "Id": "bc2f37b7b0534bc2aadfd5b52c23bc2d",
      "IsHidden": "False"
    },
    {
      "Start": "60fca59d462444339548b59f5c9bf897",
      "End": "b6acc25b7aeb4b24b90be6d7ec8e0893",
      "Id": "cfab8c70b3a84d9b99056b5c0275d149",
      "IsHidden": "False"
    },
    {
      "Start": "b5b7be6200274026b3c860719a67232b",
      "End": "6f581fa7e51d47fd8a2665902cc13260",
      "Id": "24cd19b427954765abb97561c8aca93f",
      "IsHidden": "False"
    },
    {
      "Start": "79b5ae6366dd48cca7973b2b67ab69ca",
      "End": "4c39994e58824bb389d7bcda1e438826",
      "Id": "78a608420ed947d5acd06c7ff94538fe",
      "IsHidden": "False"
    },
    {
      "Start": "79b5ae6366dd48cca7973b2b67ab69ca",
      "End": "526246e7a29e40fdada99e4f265e13d7",
      "Id": "4ea06d8bcefc46f0ae87c48c5804d183",
      "IsHidden": "False"
    },
    {
      "Start": "79b5ae6366dd48cca7973b2b67ab69ca",
      "End": "c9bddac64c934ba2aa787c78c58dd30b",
      "Id": "a9e16e69e3f34608a95acc5a39de62c3",
      "IsHidden": "False"
    },
    {
      "Start": "79b5ae6366dd48cca7973b2b67ab69ca",
      "End": "2339d969bde7486fb15d5d4f434b725e",
      "Id": "dc1e862ee3f54fd6a51450eb5a425b5e",
      "IsHidden": "False"
    },
    {
      "Start": "79b5ae6366dd48cca7973b2b67ab69ca",
      "End": "a79ddb4cacd54c69a4622918bbb8dfc7",
      "Id": "99eb61b3f042431f877140e8c3fe3b4a",
      "IsHidden": "False"
    },
    {
      "Start": "79b5ae6366dd48cca7973b2b67ab69ca",
      "End": "74aea83fb0864cef9f6783cb0b37df1f",
      "Id": "7b3f524efb2e44b7895ccb76de4aed29",
      "IsHidden": "False"
    },
    {
      "Start": "afb80c15158f429991970bd1ffbc9042",
      "End": "2f2894d8311a49d6b1dc6e87ec6871b4",
      "Id": "44d4cf51a8e848f6b0dae411b0d269ed",
      "IsHidden": "False"
    },
    {
      "Start": "77cd57bbee6a4be9aa9da7ef7b9e13e4",
      "End": "39da61cf88ab41c5bf128a8be2a192cb",
      "Id": "8eb73cc01def4ced98f3c97fe418389b",
      "IsHidden": "False"
    },
    {
      "Start": "ac27d8add76c4bcc97b77114ea727709",
      "End": "ea2d1c8e97ad4600b14e0668b9b9db38",
      "Id": "a27045f4990b4321950a52aa782926c4",
      "IsHidden": "False"
    },
    {
      "Start": "ac27d8add76c4bcc97b77114ea727709",
      "End": "6fdc25856b804d2197d54f11ff0e3802",
      "Id": "7f6eade57868418ebbc26949b1d26fc9",
      "IsHidden": "False"
    },
    {
      "Start": "f9c523b6dc5e471da20f461ad373098e",
      "End": "b7207fbce45a4adeb25d1c9c42e0b8c0",
      "Id": "8a03331636b843b9b6376310204c1b5d",
      "IsHidden": "False"
    },
    {
      "Start": "f9c523b6dc5e471da20f461ad373098e",
      "End": "fd284b01ece74dfd8d52dac2a48699bd",
      "Id": "1ce495f2870c42b885eb54e18627633f",
      "IsHidden": "False"
    },
    {
      "Start": "f9c523b6dc5e471da20f461ad373098e",
      "End": "c137aa5b6fdf40a681453a55994a5abf",
      "Id": "fcee7cc44897493d8a86ade7fb94c47a",
      "IsHidden": "False"
    },
    {
      "Start": "f9c523b6dc5e471da20f461ad373098e",
      "End": "66022dc7a7034bbf8a65f9ed9f1d3991",
      "Id": "d2b04f8fd937461587a4ee95ac522f38",
      "IsHidden": "False"
    },
    {
      "Start": "f0894a2082894a4f9f10176a5660e252",
      "End": "29d1bae2fe444e6580f13cac00a2796f",
      "Id": "0b86302b49d04fba80e0440f601a2d0e",
      "IsHidden": "False"
    },
    {
      "Start": "30feaf876ba040bdb31562cae437abe4",
      "End": "a5c345bd3f904f86ae87ec18762d9f16",
      "Id": "5139b1e8ccfb4214b3cce3f4c343a14a",
      "IsHidden": "False"
    },
    {
      "Start": "c63d3f93d05e44b19643894f7cb40f5a",
      "End": "6eec8f5242944552938fd55b82b92f99",
      "Id": "2fa45573af9f46cd9eeec917322f0426",
      "IsHidden": "False"
    },
    {
      "Start": "8b7bdcf651534828a5c4523449f2108f",
      "End": "c31f107d85cb4314a34d0af7d1334ca9",
      "Id": "b1efc261edfa4f248548fe8b364705cf",
      "IsHidden": "False"
    },
    {
      "Start": "c6c9a7198a1043ad9b59e04920019d25",
      "End": "454686f6e4704790a31796973a3e6613",
      "Id": "3e134a0ba2b042098708d909d86a0ad5",
      "IsHidden": "False"
    },
    {
      "Start": "26bc851c2652436cb918741b2d160b3c",
      "End": "2fcb502763914e50a18bebcf7599998d",
      "Id": "e47769bfef064b3da835d9578979e688",
      "IsHidden": "False"
    },
    {
      "Start": "8fd47442c90b404abf319743bd5adba6",
      "End": "7e57ec0d41774b8a850a53f11cc5d045",
      "Id": "4ec77b295fe547b6aa47fbe3adf3f896",
      "IsHidden": "False"
    },
    {
      "Start": "a2c241ff1681414dacdd69f7b5a8f214",
      "End": "9c4c5b87db1e44c4af516ee0e3dee45c",
      "Id": "4adc620e91d041578e0faf520cbf12e0",
      "IsHidden": "False"
    },
    {
      "Start": "3e210b91fd5948b6a183442c531fa09a",
      "End": "0a30c03f87b34346bd413f594d410b6d",
      "Id": "74d741a29a8741b7a06df5a8b0b8f93b",
      "IsHidden": "False"
    },
    {
      "Start": "3e210b91fd5948b6a183442c531fa09a",
      "End": "d2fd6e18e72144c79b580369ed6ff545",
      "Id": "6f1f6e1c1ab648c8ae0cfef501659572",
      "IsHidden": "False"
    },
    {
      "Start": "3e210b91fd5948b6a183442c531fa09a",
      "End": "7b42e810b7df443a8f9a868538b09ab9",
      "Id": "cc1a5e657e85401187e70fa66daa9734",
      "IsHidden": "False"
    },
    {
      "Start": "3e210b91fd5948b6a183442c531fa09a",
      "End": "efe7d75149cb46c1b6b95b0d2f05c5ae",
      "Id": "b0a9f1d7d2b14ea29ec4f3ca8bda8815",
      "IsHidden": "False"
    },
    {
      "Start": "3e210b91fd5948b6a183442c531fa09a",
      "End": "a01609d42d4344f984ae15f15ab9b68e",
      "Id": "ba4683f4400448e98b3db728f2e620a1",
      "IsHidden": "False"
    },
    {
      "Start": "55f4f9eab9394e039936809b266c3325",
      "End": "9d15bc8a5a9d481aac3055f49b8a8430",
      "Id": "c26343e72abb40ae97e4b399379d7b63",
      "IsHidden": "False"
    },
    {
      "Start": "f1dc5866f94b480e80361d60c2ddadae",
      "End": "b1d236d0363d41e49aa1e5251ab6e0be",
      "Id": "14c5c75c1a474584b8eb80bb0e4ecbff",
      "IsHidden": "False"
    },
    {
      "Start": "46938d2af3e64f50be8a61c5fa78dc1f",
      "End": "d45e632bd7324b1caf83b549e404e72b",
      "Id": "a7bf3f18fd4042869caac4edc7bb8ba9",
      "IsHidden": "False"
    },
    {
      "Start": "7e4d659a121c45518b4b14c41e5ba19d",
      "End": "0493561f1891400e8c1b78fcfd361cc0",
      "Id": "ca378b8b617f4fba9620b4942f086bf3",
      "IsHidden": "False"
    },
    {
      "Start": "de3693e3650d4235a85b5a7d975a0142",
      "End": "a01e976dfc154a72bb25f11ee2eb1b06",
      "Id": "468d7d4030e7489b871eb66e3213f8b5",
      "IsHidden": "False"
    },
    {
      "Start": "76c1ab9681e846fcad99274a7ab19d16",
      "End": "013da65fbc264d13a1d72df891de14b3",
      "Id": "bb2396037e674dfb90fc11c95f0bed23",
      "IsHidden": "False"
    },
    {
      "Start": "15fb0b54f7fd4d16af580790184a2ff1",
      "End": "6036c1796399443eb587c95b303d995d",
      "Id": "82f6d6d03c5f49bf9b5eda5a8bdabfb9",
      "IsHidden": "False"
    },
    {
      "Start": "3825370240a6434f828843f778eaa5a9",
      "End": "d049b42b123e4c5fa2440bb62cee6de4",
      "Id": "edee4b9d43794486b6f2870821180d97",
      "IsHidden": "False"
    },
    {
      "Start": "2859c3ee525340f487665acf62b0ccb3",
      "End": "3253dc6c35914aa3ad0e2349967bdc2a",
      "Id": "012ed519f5b44548b05b870373e5adf2",
      "IsHidden": "False"
    },
    {
      "Start": "2859c3ee525340f487665acf62b0ccb3",
      "End": "32331a698bc9425dadf6120ce9564ef9",
      "Id": "d39fa7d2a54e4fec8be74a09ceba0a07",
      "IsHidden": "False"
    },
    {
      "Start": "f5d2921a900b436ea23aa6e84b81ba1e",
      "End": "5bfb8549272e4042ae79fd251e5b5245",
      "Id": "0362a3f5f25f42f284f164f92642fd79",
      "IsHidden": "False"
    },
    {
      "Start": "10c3da60f8ed4c15a66ebcdd84a565a3",
      "End": "836c86048b5b4abda075b15efd88a171",
      "Id": "8ed4a57061524cc89ea1d96c64a61bb9",
      "IsHidden": "False"
    },
    {
      "Start": "4f74b12d0ba0479a9f82a6fd1e3464e3",
      "End": "dfc8bda3d66c4555becf349b42b2e8a3",
      "Id": "6615a9ba8fad4a0d860dabd3bd3daf72",
      "IsHidden": "False"
    },
    {
      "Start": "4f74b12d0ba0479a9f82a6fd1e3464e3",
      "End": "f5e56e1f8fda44c6ba07cf5fa41016a7",
      "Id": "1d6cca3b18254cc4a0c073aff811d03e",
      "IsHidden": "False"
    },
    {
      "Start": "f87ad6bf8f1e499d9a05828ce23ce109",
      "End": "b6b8be287896485ebeaf1016846e110e",
      "Id": "64ef5d0896184269a5c40a9d36660172",
      "IsHidden": "False"
    },
    {
      "Start": "0aaf13e0360740b1b52042f240cc4362",
      "End": "73a43074e0ff4c06aeefd0af38085981",
      "Id": "19124f576d734a478e0c526bb9da5c93",
      "IsHidden": "False"
    },
    {
      "Start": "0aaf13e0360740b1b52042f240cc4362",
      "End": "67b6007f002343ba9ba41b17b25fd84f",
      "Id": "b04eef99e7ca4014a822fa545e48153e",
      "IsHidden": "False"
    },
    {
      "Start": "656a59263e4e4b9dafac952a1235dadc",
      "End": "67513bdc5e1f44e88d3d0418604ff53d",
      "Id": "89552e6795894747a1a7269bdbdf97c6",
      "IsHidden": "False"
    },
    {
      "Start": "7764b49c75f04e3a990877edf4d86cea",
      "End": "4f481aa7d6d44a1eb1dce97d4c4636b9",
      "Id": "a7190bcf373e4a9dadb7298668446501",
      "IsHidden": "False"
    },
    {
      "Start": "7764b49c75f04e3a990877edf4d86cea",
      "End": "bd8e889f49d94f2e9a7bb0c947caffde",
      "Id": "efeb0d3ab30f40678286132ff9d02059",
      "IsHidden": "False"
    },
    {
      "Start": "675b497dac9f46d0b14e99c7265cc6f0",
      "End": "37865aa978904fc9988623986cfa229f",
      "Id": "79b9cc5ce42c459abb2f6e8c8ebf86da",
      "IsHidden": "False"
    },
    {
      "Start": "750bee0212f440b2b4917ff223499c87",
      "End": "8bc3be1ba3334918b1603da7617c25e5",
      "Id": "e6791f6b7d474df9932c044a09181254",
      "IsHidden": "False"
    },
    {
      "Start": "750bee0212f440b2b4917ff223499c87",
      "End": "5fac73a2ed464508b3b2cc99212398fb",
      "Id": "ddc2079757974488a0ab5d87053c5c80",
      "IsHidden": "False"
    },
    {
      "Start": "750bee0212f440b2b4917ff223499c87",
      "End": "8bc3be1ba3334918b1603da7617c25e5",
      "Id": "45e8230c4eb7489aba9260bfda2328ae",
      "IsHidden": "False"
    },
    {
      "Start": "750bee0212f440b2b4917ff223499c87",
      "End": "5fac73a2ed464508b3b2cc99212398fb",
      "Id": "f39daaf01a204b2aa0b278182418801e",
      "IsHidden": "False"
    },
    {
      "Start": "d8596fdf1a3044d0ba2b4a96c7b48b5e",
      "End": "f5a889f02f124f2ca74741b195aa0651",
      "Id": "df8d540ec9a64d34872c58244b73af0c",
      "IsHidden": "False"
    },
    {
      "Start": "d8596fdf1a3044d0ba2b4a96c7b48b5e",
      "End": "445413f0563b49c4aef5fcd6518d6110",
      "Id": "0a2dc2e81b574299a8bb5e625959931f",
      "IsHidden": "False"
    },
    {
      "Start": "d8596fdf1a3044d0ba2b4a96c7b48b5e",
      "End": "f5a889f02f124f2ca74741b195aa0651",
      "Id": "2bddb9ec8edd4901996dc60e5c7f1f6b",
      "IsHidden": "False"
    },
    {
      "Start": "d8596fdf1a3044d0ba2b4a96c7b48b5e",
      "End": "445413f0563b49c4aef5fcd6518d6110",
      "Id": "a3f2286486484d659491016aaaa7a61e",
      "IsHidden": "False"
    },
    {
      "Start": "c1bf424a29f8438181f3d0bb14909b84",
      "End": "e6a1e329c4fb4ec6a2cfcec4853c3f59",
      "Id": "3599e20869a24603b8f4e6db4a22882a",
      "IsHidden": "False"
    },
    {
      "Start": "c1bf424a29f8438181f3d0bb14909b84",
      "End": "48d458dbd565426fa5cb118fa3affd03",
      "Id": "7a6effed4fc74497879d86235f2a5cc5",
      "IsHidden": "False"
    },
    {
      "Start": "c1bf424a29f8438181f3d0bb14909b84",
      "End": "e6a1e329c4fb4ec6a2cfcec4853c3f59",
      "Id": "67b50bdf01dd4880b2ae12f7bce454d4",
      "IsHidden": "False"
    },
    {
      "Start": "c1bf424a29f8438181f3d0bb14909b84",
      "End": "48d458dbd565426fa5cb118fa3affd03",
      "Id": "b90e8de982a6481d9fa6dfa2a6843e1b",
      "IsHidden": "False"
    },
    {
      "Start": "b8d424a378f0414e9041b85bc4a816be",
      "End": "e56c0f3546ed47efa1e3772f5e3c5983",
      "Id": "f0504a39e7a84bf0a2f56702c92a7f93",
      "IsHidden": "False"
    },
    {
      "Start": "0fd9244cbd47424492730aee1407edf0",
      "End": "f73f5f7a88cd4cd1b49a549a435a1063",
      "Id": "30f68e255ed04b0497b2e675610b03e1",
      "IsHidden": "False"
    },
    {
      "Start": "37834e0ea8e34a01b74bf10394fa6d9a",
      "End": "a0b3e17e92d048c1af5bd9b445ea6fd8",
      "Id": "a0eaf332662c425ba3d2f80a0ed21c6b",
      "IsHidden": "False"
    },
    {
      "Start": "c2fc5c58a0f54bdba0517ea6e661e3e5",
      "End": "b421fa3f58dd49c0b9eab23190a2b2f4",
      "Id": "5f9b05af62c54931b6b1176065ebed61",
      "IsHidden": "False"
    },
    {
      "Start": "aab503dd89a54232a802523aafdf429b",
      "End": "42e5fa656b29445eb3fa98dec41ebf38",
      "Id": "a608ed34bb234013a6d271676137fd66",
      "IsHidden": "False"
    },
    {
      "Start": "c389043c115e49ec81fc6e7ae6aed97f",
      "End": "6ce608ad3d3b4af99cb9729ea1596e40",
      "Id": "b4caaf076ab2491f86f344c2f7d33b8e",
      "IsHidden": "False"
    },
    {
      "Start": "f091f5a965ae4e20b369f046afa98f09",
      "End": "d1769de15c1749a3a8b118114dc80903",
      "Id": "53267386991642c885632a3e292a2034",
      "IsHidden": "False"
    },
    {
      "Start": "f091f5a965ae4e20b369f046afa98f09",
      "End": "96a52d07f1b048cabafc13de0ad9613f",
      "Id": "73b6054b0ee6421d89ad8ae3a90aad56",
      "IsHidden": "False"
    },
    {
      "Start": "70dff9ed8a3541549c4562290325584f",
      "End": "a965bea05fdb47e0b374a5e2835a8512",
      "Id": "edeef0adf3f54581838599b8d5749338",
      "IsHidden": "False"
    },
    {
      "Start": "70dff9ed8a3541549c4562290325584f",
      "End": "e0a20e08d28242d0bfe594325cd42620",
      "Id": "1d1da64b186f437e9524470296a5d3cc",
      "IsHidden": "False"
    },
    {
      "Start": "d09b9ce03d624dbd93fac92b0540049f",
      "End": "a1ceede13b424bf5b063e624ce4fa71a",
      "Id": "ae5758f376ad473ab254df8fd94021f2",
      "IsHidden": "False"
    },
    {
      "Start": "8555e81c11264ccd811b7647d9971c46",
      "End": "fbfe991d245b4bb887289d1644efbb04",
      "Id": "4cd95e463205403aa9d3e5ae80b70206",
      "IsHidden": "False"
    },
    {
      "Start": "bfc8f26a99be40ca95f8539fc5abd0b9",
      "End": "87c939634e924429bb471561ef6aeeeb",
      "Id": "e6971298ed16477381bf35776f397fd0",
      "IsHidden": "False"
    },
    {
      "Start": "fd72e34726744fb8b2a987c602e7ea71",
      "End": "85b2fe7b0e284c8cb2d03becc41f99aa",
      "Id": "4f6aea7ab73d42aabf7b4bba4c3c12cc",
      "IsHidden": "False"
    },
    {
      "Start": "06c50036ca544b4083db4a1aba44e75b",
      "End": "79746a27312c46c2899efe3f99eb13a7",
      "Id": "b665cface53e4ba1b3b77345ee0e899c",
      "IsHidden": "False"
    },
    {
      "Start": "44957d34199649a18b6e9682e3dffc8f",
      "End": "adb00369947a4134b52c1f1c914610b9",
      "Id": "4feff5d88cd34ea89d86486f411879f2",
      "IsHidden": "False"
    }
  ],
  "Dependencies": [],
  "NodeLibraryDependencies": [],
  "Thumbnail": "",
  "GraphDocumentationURL": null,
  "ExtensionWorkspaceData": [
    {
      "ExtensionGuid": "28992e1d-abb9-417f-8b1b-05e053bee670",
      "Name": "Eigenschaften",
      "Version": "2.16",
      "Data": {}
    }
  ],
  "Author": "",
  "Linting": {
    "activeLinter": "Keine",
    "activeLinterId": "7b75fb44-43fd-4631-a878-29f4d5d8399a",
    "warningCount": 0,
    "errorCount": 0
  },
  "Bindings": [],
  "View": {
    "Dynamo": {
      "ScaleFactor": 1.0,
      "HasRunWithoutCrash": true,
      "IsVisibleInDynamoLibrary": true,
      "Version": "2.16.0.2501",
      "RunType": "Automatic",
      "RunPeriod": "1000"
    },
    "Camera": {
      "Name": "Hintergrundvorschau",
      "EyeX": -9.2182235717773438,
      "EyeY": 4.7919998168945313,
      "EyeZ": -10.212628364562988,
      "LookX": 14.202507019042969,
      "LookY": -2.7807998657226563,
      "LookZ": 7.2959308624267578,
      "UpX": -0.0387989841401577,
      "UpY": 0.99904823303222656,
      "UpZ": -0.019930057227611542
    },
    "ConnectorPins": [],
    "NodeViews": [
      {
        "Name": "Left.Elevated",
        "ShowGeometry": true,
        "Id": "602889f410024726abf45f4b60933959",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -1787.9888502768617,
        "Y": 674.93255156248688
      },
      {
        "Name": "Left.Corner",
        "ShowGeometry": true,
        "Id": "c3874176962846e38104d2b399c5e543",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -1787.9888502768617,
        "Y": 420.95033674998831
      },
      {
        "Name": "Pergola.Elevation.Left",
        "ShowGeometry": true,
        "Id": "3efdef1ef063402d95887e1eec0c33cf",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2929.9888502768617,
        "Y": 1032.1599098878178
      },
      {
        "Name": "Rigth.Corner",
        "ShowGeometry": true,
        "Id": "5aa9c1d1c8364905981ac703c581225c",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2060.2144978410547,
        "Y": 1842.3389931382569
      },
      {
        "Name": "Pergola.Width",
        "ShowGeometry": true,
        "Id": "809d90299f4e49c2ad1ff5b5f13fbbd4",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2929.9888502768617,
        "Y": 2094.2634922265415
      },
      {
        "Name": "NurbsCurve.ByPoints",
        "ShowGeometry": true,
        "Id": "acf630999bac4d0393cd8cac77a1fe24",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 314.90220926794962,
        "Y": 883.61785265785181
      },
      {
        "Name": "List Create",
        "ShowGeometry": true,
        "Id": "d7363aa8ff7744b4be2a42883a31b098",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 40.902209267949615,
        "Y": 758.61785265785181
      },
      {
        "Name": "Rigth.Elevated",
        "ShowGeometry": true,
        "Id": "ee9e90b58afb4ed68867eebe0c738572",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -1787.9888502768617,
        "Y": 898.93255156248688
      },
      {
        "Name": "Struts.Degree",
        "ShowGeometry": true,
        "Id": "0496295051e647c18c8842659bc368a2",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 40.9022092679496,
        "Y": 1042.44535265785
      },
      {
        "Name": "Geometry.Translate",
        "ShowGeometry": true,
        "Id": "996816fe85774fd1be72868ebb70f536",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1657.8336179014482,
        "Y": 881.41911991390646
      },
      {
        "Name": "Sequence",
        "ShowGeometry": true,
        "Id": "8f7784ac3d144ea2bfa857a47523e33a",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1362.8336179014482,
        "Y": 915.41911991390646
      },
      {
        "Name": "PolyCurve.ByThickeningCurveNormal",
        "ShowGeometry": true,
        "Id": "c71353aedad24aabb1f6bf890f09090f",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2015.8336179014482,
        "Y": 1062.4191199139063
      },
      {
        "Name": "Struts..Thickness",
        "ShowGeometry": true,
        "Id": "7423726ffea1448fac96d11581afb080",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1657.8336179014482,
        "Y": 1130.2466199139067
      },
      {
        "Name": "Vector.XAxis",
        "ShowGeometry": true,
        "Id": "796bfeaebf214658be765be4ccdc8afd",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1657.8336179014482,
        "Y": 1277.4191199139063
      },
      {
        "Name": "Surface.ByPatch",
        "ShowGeometry": true,
        "Id": "4bc35962ea804f77ad81690fd553cfcb",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2573.02678491811,
        "Y": 1410.2807256881867
      },
      {
        "Name": "Surface.Thicken",
        "ShowGeometry": true,
        "Id": "6e578e127a38408d9019182452be4bf4",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2918.02678491811,
        "Y": 1467.2807256881867
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "ff358cbb1cef49d59c41c144ce2dbe27",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2573.02678491811,
        "Y": 1558.1082256881866
      },
      {
        "Name": "Line.ByStartPointDirectionLength",
        "ShowGeometry": true,
        "Id": "7966e23ec6104a528b011bc6d29e7af7",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 503.2946125440119,
        "Y": 2374.1837625260814
      },
      {
        "Name": "Vector.XAxis",
        "ShowGeometry": true,
        "Id": "76e4127e4ec941139737746252cd219f",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 220.2946125440119,
        "Y": 2418.1837625260814
      },
      {
        "Name": "PolyCurve.ByThickeningCurveNormal",
        "ShowGeometry": true,
        "Id": "d54989e65a734e5f85d7d7101356b092",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 927.2946125440119,
        "Y": 2531.1837625260814
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "d7da67a0851643c3bb55701b55cfb3e8",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 503.2946125440119,
        "Y": 2587.0112625260813
      },
      {
        "Name": "Vector.ZAxis",
        "ShowGeometry": true,
        "Id": "2ed91c93aac24f0c830744f12a33801e",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 503.2946125440119,
        "Y": 2734.1837625260814
      },
      {
        "Name": "MidPoint.Elevated",
        "ShowGeometry": true,
        "Id": "85fced6fa6e447939efbd3333a237a87",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2096.9888502768617,
        "Y": 1252.5597682131474
      },
      {
        "Name": "Curve.PlaneAtParameter",
        "ShowGeometry": true,
        "Id": "4b97051b3ff94c72bfc7cfab3649484c",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1377.2946125440119,
        "Y": 2398.1837625260814
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "65573b60bd3c4852981591cdd9680d5a",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 927.2946125440119,
        "Y": 2383.0112625260813
      },
      {
        "Name": "Rectangle.ByWidthLength",
        "ShowGeometry": true,
        "Id": "cfeaa9621c8a47f0a793390ca93737a5",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1732.2946125440119,
        "Y": 2532.1837625260814
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "97b9bc903b4a42cc8e9f69ebafca6149",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1377.2946125440119,
        "Y": 2576.0112625260813
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "e3edd2324b9846fa8de3289233d66280",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1377.2946125440119,
        "Y": 2724.0112625260813
      },
      {
        "Name": "Solid.BySweep",
        "ShowGeometry": true,
        "Id": "a5a8699817f945eca2466b1bf2810213",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2099.2946125440121,
        "Y": 2532.1837625260814
      },
      {
        "Name": "List Create",
        "ShowGeometry": true,
        "Id": "fa36078277474696aa9fe1eeafa88872",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 220.2946125440119,
        "Y": 2241.1837625260814
      },
      {
        "Name": "Pergola.Elevation.Right",
        "ShowGeometry": true,
        "Id": "b23dfddb258b4d81be96c2e9fdd08c4d",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2929.9888502768617,
        "Y": 1945.8672552488797
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "3f12c8da6aa84cefbb9ad35a3ad019b2",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 817.06738062928127,
        "Y": 1003.828985655415
      },
      {
        "Name": "MidPoint",
        "ShowGeometry": true,
        "Id": "b0a89648ef19409fac6a8c490a152e35",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2096.9888502768617,
        "Y": 1028.5597682131474
      },
      {
        "Name": "Line.ByStartPointEndPoint",
        "ShowGeometry": true,
        "Id": "a22cfb19925340cca64a358609093df1",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -1787.9888502768617,
        "Y": 1123.5597682131474
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "a176249b724a40bf849e7139e13a2a2d",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2980.4018555243356,
        "Y": 2087.3377390551259
      },
      {
        "Name": "PolyCurve.ByThickeningCurveNormal",
        "ShowGeometry": true,
        "Id": "09e51318bc0d40f39207958364c5758d",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 3322.4018555243356,
        "Y": 1985.5102390551258
      },
      {
        "Name": "Surface.ByPatch",
        "ShowGeometry": true,
        "Id": "9ba4fcc636064c818e88b35a43b8c30f",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 3772.4018555243356,
        "Y": 2002.5102390551258
      },
      {
        "Name": "Surface.Thicken",
        "ShowGeometry": true,
        "Id": "5c88bdf4098d495aa66a929682fe3f0a",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 4117.4018555243356,
        "Y": 2002.5102390551258
      },
      {
        "Name": "Geometry.Translate",
        "ShowGeometry": true,
        "Id": "717d502eb1d343b0896909c8099fb53a",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2980.4018555243356,
        "Y": 2235.5102390551256
      },
      {
        "Name": "Vector.XAxis",
        "ShowGeometry": true,
        "Id": "0644a188e97c40d287b850ab6982d666",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2579.4018555243356,
        "Y": 2212.5102390551256
      },
      {
        "Name": "Distance.SecondMiddleStrut",
        "ShowGeometry": true,
        "Id": "e9fb6fd724cd44518cac3e466dd6962c",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2579.4018555243356,
        "Y": 2360.5102390551283
      },
      {
        "Name": "PolyCurve.ByThickeningCurveNormal",
        "ShowGeometry": true,
        "Id": "9b752669db384716be7624331445403f",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 3322.4018555243356,
        "Y": 2197.5102390551256
      },
      {
        "Name": "Surface.Thicken",
        "ShowGeometry": true,
        "Id": "238941c0c8f34577bf0420a18b37e79b",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 4117.4018555243356,
        "Y": 2180.5102390551256
      },
      {
        "Name": "Surface.ByPatch",
        "ShowGeometry": true,
        "Id": "692c0368c5b841c2b36062a2c98279aa",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 3772.4018555243356,
        "Y": 2180.5102390551256
      },
      {
        "Name": "Color Palette",
        "ShowGeometry": true,
        "Id": "382cbd07a95143bc8f13e9e04d2cd898",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 2918.02678491811,
        "Y": 1645.2807256881867
      },
      {
        "Name": "GeometryColor.ByGeometryColor",
        "ShowGeometry": true,
        "Id": "9e82fbdf18214be083bbc982c68891dc",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 3234.02678491811,
        "Y": 1539.2807256881867
      },
      {
        "Name": "Pergola.Length",
        "ShowGeometry": true,
        "Id": "db486cca8f4c46cf89e3a97b23769b3e",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 946.031300879948,
        "Y": 1542.94494530544
      },
      {
        "Name": "List Create",
        "ShowGeometry": true,
        "Id": "99c7193b77d24f55b61e683d4ba9eaba",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -21.545057557200835,
        "Y": 3031.1481921510781
      },
      {
        "Name": "Solid.BySweep",
        "ShowGeometry": true,
        "Id": "745b71cf044e488ea751835ce84f08c7",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1839.4549424427992,
        "Y": 3278.1481921510781
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "e1787852e46c4251ae1a9ab49dc73091",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1117.4549424427992,
        "Y": 3469.975692151078
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "61720e6c88cf474795d5a5a856804eee",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1117.4549424427992,
        "Y": 3321.975692151078
      },
      {
        "Name": "Rectangle.ByWidthLength",
        "ShowGeometry": true,
        "Id": "aead860adf7642d29437390060e64a9a",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1472.4549424427992,
        "Y": 3278.1481921510781
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "0031c7578fc949a5ba171c5f65973bd8",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 776.44905597969409,
        "Y": 3130.5108205107522
      },
      {
        "Name": "Curve.PlaneAtParameter",
        "ShowGeometry": true,
        "Id": "d923244077fd4b46af2ba275ad28407d",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 1117.4549424427992,
        "Y": 3144.1481921510781
      },
      {
        "Name": "Vector.ZAxis",
        "ShowGeometry": true,
        "Id": "b4062776789c427984e7987d0781d4c0",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 243.45494244279917,
        "Y": 3480.1481921510781
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "3234cb2a23d0491da47ea751a29a885c",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 243.45494244279917,
        "Y": 3332.975692151078
      },
      {
        "Name": "PolyCurve.ByThickeningCurveNormal",
        "ShowGeometry": true,
        "Id": "46b9b31a4349420b8eee614066ad4c21",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 667.45494244279917,
        "Y": 3277.1481921510781
      },
      {
        "Name": "Vector.XAxis",
        "ShowGeometry": true,
        "Id": "07db20e4d1fb4fd6a1becdd2c7f25a3f",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -21.545057557200835,
        "Y": 3243.1481921510781
      },
      {
        "Name": "Line.ByStartPointDirectionLength",
        "ShowGeometry": true,
        "Id": "b3b7c999d90947c6ad019a755e31a17b",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 243.45494244279917,
        "Y": 3120.1481921510781
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "65cbae36322b4e1b9d66b7c8b5d2786c",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2481.9888502768617,
        "Y": 1173.3872682131473
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "c84dec3ccd964a68a5878ee6f0ccf1ad",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2481.9888502768617,
        "Y": 1321.3872682131478
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "729ebb31f529400a9493992212031bdb",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2.0,
        "Y": 2698.0
      },
      {
        "Name": "-",
        "ShowGeometry": true,
        "Id": "51180bae44ce402ba779eb3aebafa02e",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": 189.40446780973878,
        "Y": 2563.253128480188
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "a7c406e7f32b40e98c1b1b5074673800",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -33.7053874559881,
        "Y": 2599.01126252608
      },
      {
        "Name": "Lastkräfte berechnen",
        "ShowGeometry": true,
        "Id": "c803d26424eb4da9b17c9b25c33b328f",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -4001.99320673562,
        "Y": 3077.8160774606031
      },
      {
        "Name": "Lagerkräfte berechnen - Eigengewicht",
        "ShowGeometry": true,
        "Id": "a80aeb34dfb44a09a65e13dcfa9c27a7",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2833.99320673562,
        "Y": 3402.4035774606032
      },
      {
        "Name": "Lagerkräfte berechnen - Schneelast",
        "ShowGeometry": true,
        "Id": "9e81f8f1285f40e387069533ed399150",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -3499.99320673562,
        "Y": 3237.989827460603
      },
      {
        "Name": "Lagerkräfte berechnen - Windlast",
        "ShowGeometry": true,
        "Id": "084b29a848114f2caf9cdd895c2e4c90",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2833.99320673562,
        "Y": 3154.748577460603
      },
      {
        "Name": "Maximale Normalkraft",
        "ShowGeometry": true,
        "Id": "c5b0e06937f147c3ae290d0a63e292b5",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2082.99320673562,
        "Y": 3268.6110774606032
      },
      {
        "Name": "Maximale Querkaft",
        "ShowGeometry": true,
        "Id": "e63da51fceb74757b9ac2eb8d67ec2d1",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -2082.99320673562,
        "Y": 3480.6110774606032
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "f1b861dcf4114f9c83ab83ac63ecd082",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -4001.99320673562,
        "Y": 3414.6792024606029
      },
      {
        "Name": "Code Block",
        "ShowGeometry": true,
        "Id": "8c87fa6dc0c940069583e27181bcb7d9",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -4001.99320673562,
        "Y": 3572.6792024606029
      },
      {
        "Name": "Watch",
        "ShowGeometry": true,
        "Id": "5cea27851ac845fdb30e0c9b2d3028a5",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -1521.9932067356199,
        "Y": 3331.4735774606033
      },
      {
        "Name": "Statiknachweise",
        "ShowGeometry": true,
        "Id": "b77a6e5b1f1c493cae263f2b84fdb987",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -1196.9932067356199,
        "Y": 3356.4735774606033
      },
      {
        "Name": "Normalspannungsnachweis Erfüllt True / False",
        "ShowGeometry": true,
        "Id": "3e395ac6d3a04b6e80bbc777acc74b45",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -636.99320673561988,
        "Y": 3332.3710774606034
      },
      {
        "Name": "Schubsspannungsnachweis Erfüllt True / False",
        "ShowGeometry": true,
        "Id": "71ec84abff26453f99fc048ccdcac0f2",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -641.40056239126739,
        "Y": 3546.5113938369141
      },
      {
        "Name": "Watch",
        "ShowGeometry": true,
        "Id": "70caf6658c9d4649a12b8b165c36dbc3",
        "IsSetAsInput": false,
        "IsSetAsOutput": false,
        "Excluded": false,
        "X": -1521.9932067356199,
        "Y": 3483.4735774606033
      }
    ],
    "Annotations": [
      {
        "Id": "c0685b7b704b438bbe15ec76c5bc82d2",
        "Title": "2. Merging the points + Adding BasicCurveForm 1D",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "acf630999bac4d0393cd8cac77a1fe24",
          "d7363aa8ff7744b4be2a42883a31b098",
          "0496295051e647c18c8842659bc368a2"
        ],
        "HasNestedGroups": false,
        "Left": 30.9022092679496,
        "Top": 642.61785265785181,
        "Width": 532.0,
        "Height": 531.82749999999817,
        "FontSize": 36.0,
        "InitialTop": 758.61785265785181,
        "InitialHeight": 428.82749999999817,
        "TextblockHeight": 106.0,
        "Background": "#FFD4B6DB"
      },
      {
        "Id": "776c0ed851e64356883d7d0ac1be41a0",
        "Title": "3.Translated Curves 2D",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "996816fe85774fd1be72868ebb70f536",
          "8f7784ac3d144ea2bfa857a47523e33a",
          "c71353aedad24aabb1f6bf890f09090f",
          "7423726ffea1448fac96d11581afb080",
          "796bfeaebf214658be765be4ccdc8afd",
          "3f12c8da6aa84cefbb9ad35a3ad019b2",
          "db486cca8f4c46cf89e3a97b23769b3e"
        ],
        "HasNestedGroups": false,
        "Left": 807.06738062928127,
        "Top": 808.41911991390646,
        "Width": 1568.766237272167,
        "Height": 866.52582539153343,
        "FontSize": 36.0,
        "InitialTop": 881.41911991390646,
        "InitialHeight": 806.52582539153343,
        "TextblockHeight": 63.0,
        "Background": "#FFFFC999"
      },
      {
        "Id": "169eed7a0bd541eca33ef85b2057a920",
        "Title": "5.a Modeling the Fundament",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "7966e23ec6104a528b011bc6d29e7af7",
          "76e4127e4ec941139737746252cd219f",
          "d54989e65a734e5f85d7d7101356b092",
          "d7da67a0851643c3bb55701b55cfb3e8",
          "2ed91c93aac24f0c830744f12a33801e",
          "4b97051b3ff94c72bfc7cfab3649484c",
          "65573b60bd3c4852981591cdd9680d5a",
          "cfeaa9621c8a47f0a793390ca93737a5",
          "97b9bc903b4a42cc8e9f69ebafca6149",
          "e3edd2324b9846fa8de3289233d66280",
          "a5a8699817f945eca2466b1bf2810213",
          "fa36078277474696aa9fe1eeafa88872",
          "a7c406e7f32b40e98c1b1b5074673800",
          "51180bae44ce402ba779eb3aebafa02e"
        ],
        "HasNestedGroups": false,
        "Left": -43.7053874559881,
        "Top": 2168.1837625260814,
        "Width": 2371.0,
        "Height": 710.0,
        "FontSize": 36.0,
        "InitialTop": 2241.1837625260814,
        "InitialHeight": 638.0,
        "TextblockHeight": 63.0,
        "Background": "#FFA4E1FF"
      },
      {
        "Id": "292e6e25082740adad84db1832bb0d32",
        "Title": "4.b Managing the two Middle Struts ",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "a176249b724a40bf849e7139e13a2a2d",
          "09e51318bc0d40f39207958364c5758d",
          "9ba4fcc636064c818e88b35a43b8c30f",
          "5c88bdf4098d495aa66a929682fe3f0a",
          "717d502eb1d343b0896909c8099fb53a",
          "0644a188e97c40d287b850ab6982d666",
          "9b752669db384716be7624331445403f",
          "238941c0c8f34577bf0420a18b37e79b",
          "692c0368c5b841c2b36062a2c98279aa",
          "e9fb6fd724cd44518cac3e466dd6962c"
        ],
        "HasNestedGroups": false,
        "Left": 2569.4018555243356,
        "Top": 1912.5102390551258,
        "Width": 1774.0,
        "Height": 580.0000000000025,
        "FontSize": 36.0,
        "InitialTop": 1985.5102390551258,
        "InitialHeight": 520.0000000000025,
        "TextblockHeight": 63.0,
        "Background": "#FFB9F9E1"
      },
      {
        "Id": "8800a2c867e14ede84b7d014f3c1c5e4",
        "Title": "4.a 3D",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "4bc35962ea804f77ad81690fd553cfcb",
          "6e578e127a38408d9019182452be4bf4",
          "ff358cbb1cef49d59c41c144ce2dbe27",
          "382cbd07a95143bc8f13e9e04d2cd898",
          "9e82fbdf18214be083bbc982c68891dc"
        ],
        "HasNestedGroups": false,
        "Left": 2563.02678491811,
        "Top": 1337.2807256881867,
        "Width": 1001.0,
        "Height": 440.0,
        "FontSize": 36.0,
        "InitialTop": 1410.2807256881867,
        "InitialHeight": 380.0,
        "TextblockHeight": 63.0,
        "Background": "#FFB9F9E1"
      },
      {
        "Id": "876607b7f33f458a9e675bdd4e77d036",
        "Title": "5.b Modeling the Longitudinal beams",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "b3b7c999d90947c6ad019a755e31a17b",
          "07db20e4d1fb4fd6a1becdd2c7f25a3f",
          "46b9b31a4349420b8eee614066ad4c21",
          "3234cb2a23d0491da47ea751a29a885c",
          "b4062776789c427984e7987d0781d4c0",
          "d923244077fd4b46af2ba275ad28407d",
          "0031c7578fc949a5ba171c5f65973bd8",
          "aead860adf7642d29437390060e64a9a",
          "61720e6c88cf474795d5a5a856804eee",
          "e1787852e46c4251ae1a9ab49dc73091",
          "745b71cf044e488ea751835ce84f08c7",
          "99c7193b77d24f55b61e683d4ba9eaba"
        ],
        "HasNestedGroups": false,
        "Left": -31.545057557200835,
        "Top": 2958.1481921510781,
        "Width": 2099.0,
        "Height": 666.0,
        "FontSize": 36.0,
        "InitialTop": 3031.1481921510781,
        "InitialHeight": 594.0,
        "TextblockHeight": 63.0,
        "Background": "#FFA4E1FF"
      },
      {
        "Id": "e03c2899cdd34ca89fd01111d2db3b09",
        "Title": "1. Bestimmung der Eckpunkte /Zentralen Punkte für die Geometrie",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "602889f410024726abf45f4b60933959",
          "c3874176962846e38104d2b399c5e543",
          "3efdef1ef063402d95887e1eec0c33cf",
          "5aa9c1d1c8364905981ac703c581225c",
          "809d90299f4e49c2ad1ff5b5f13fbbd4",
          "ee9e90b58afb4ed68867eebe0c738572",
          "85fced6fa6e447939efbd3333a237a87",
          "b23dfddb258b4d81be96c2e9fdd08c4d",
          "b0a89648ef19409fac6a8c490a152e35",
          "a22cfb19925340cca64a358609093df1",
          "65cbae36322b4e1b9d66b7c8b5d2786c",
          "c84dec3ccd964a68a5878ee6f0ccf1ad",
          "e633f1f6b7c8407281c43122907f2e28",
          "31d06bb9d83d458d824e5b853a9f64ea"
        ],
        "HasNestedGroups": false,
        "Left": -2939.9888502768617,
        "Top": 347.95033674998831,
        "Width": 1433.0,
        "Height": 1878.3131554765532,
        "FontSize": 36.0,
        "InitialTop": 420.95033674998831,
        "InitialHeight": 1376.848537758631,
        "TextblockHeight": 63.0,
        "Background": "#FFC1D676"
      },
      {
        "Id": "444da69538004f2b9e429f2b7ff6f09e",
        "Title": "6. High Performance Criteria - Statiknachweise: Normal- und Schubspannungsnachweis",
        "DescriptionText": "<Hier doppelklicken, um die Gruppenbeschreibung zu bearbeiten>",
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [
          "c803d26424eb4da9b17c9b25c33b328f",
          "a80aeb34dfb44a09a65e13dcfa9c27a7",
          "9e81f8f1285f40e387069533ed399150",
          "084b29a848114f2caf9cdd895c2e4c90",
          "c5b0e06937f147c3ae290d0a63e292b5",
          "e63da51fceb74757b9ac2eb8d67ec2d1",
          "f1b861dcf4114f9c83ab83ac63ecd082",
          "8c87fa6dc0c940069583e27181bcb7d9",
          "5cea27851ac845fdb30e0c9b2d3028a5",
          "b77a6e5b1f1c493cae263f2b84fdb987",
          "3e395ac6d3a04b6e80bbc777acc74b45",
          "71ec84abff26453f99fc048ccdcac0f2",
          "70caf6658c9d4649a12b8b165c36dbc3"
        ],
        "HasNestedGroups": false,
        "Left": -4011.99320673562,
        "Top": 3004.8160774606031,
        "Width": 3808.0,
        "Height": 709.86312499999985,
        "FontSize": 36.0,
        "InitialTop": 3077.8160774606031,
        "InitialHeight": 864.58189568908756,
        "TextblockHeight": 63.0,
        "Background": "#FF71C6A8"
      },
      {
        "Id": "e633f1f6b7c8407281c43122907f2e28",
        "Title": "Max.10 because Windlast-Rechnung",
        "DescriptionText": null,
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [],
        "HasNestedGroups": false,
        "Left": -2929.9888502768617,
        "Top": 993.15990988781778,
        "Width": 0.0,
        "Height": 0.0,
        "FontSize": 36.0,
        "InitialTop": 0.0,
        "InitialHeight": 0.0,
        "TextblockHeight": 0.0,
        "Background": "#FFC1D676"
      },
      {
        "Id": "31d06bb9d83d458d824e5b853a9f64ea",
        "Title": "Max.10 because Windlast-Rechnung",
        "DescriptionText": null,
        "IsExpanded": true,
        "WidthAdjustment": 0.0,
        "HeightAdjustment": 0.0,
        "Nodes": [],
        "HasNestedGroups": false,
        "Left": -2929.9888502768617,
        "Top": 1906.8672552488797,
        "Width": 0.0,
        "Height": 0.0,
        "FontSize": 36.0,
        "InitialTop": 0.0,
        "InitialHeight": 0.0,
        "TextblockHeight": 0.0,
        "Background": "#FFC1D676"
      }
    ],
    "X": 593.23708440902021,
    "Y": 200.05236892269625,
    "Zoom": 0.082506248517500963
  }
}