{"id":3876,"date":"2021-02-13T16:24:07","date_gmt":"2021-02-13T16:24:07","guid":{"rendered":"http:\/\/141.23.68.248\/wp\/?page_id=3876"},"modified":"2021-02-22T17:06:33","modified_gmt":"2021-02-22T17:06:33","slug":"combined-parametric-model","status":"publish","type":"page","link":"http:\/\/141.23.68.248\/wp\/?page_id=3876","title":{"rendered":"Combined Parametric Model"},"content":{"rendered":"

Integrated Parametric Model<\/strong><\/p>\n

The three civil systems:<\/span>\u00a0<\/span>Building Automation System (BAS)<\/a>, Office Building<\/a>\u00a0<\/span>and <\/span>Drywall Ceiling<\/a>\u00a0<\/span>were combined into one parametric model (CombinedParametricModel-Dynamo<\/a>). To integrate the different models, it was appropriate to choose the office building as the main system and to equip it with a BAS and suspended drywall ceilings.\u00a0<\/span><\/p>\n

The aim in developing the integrated parametric model was to connect the different systems and enable interactions between them. In addition, it was focused on creating an office building model that takes into account energy efficiency and provides daylight-harvesting strategies. To achieve these goals, the following parameters were included to influence the integrated parametric model:<\/span><\/p>\n

\"Inputparameter-OfficeBuilding\"<\/a><\/p>\n

Alternatives<\/b><\/p>\n

To evaluate the performance of the office building design, the following analysis were performed:<\/span><\/p>\n

First analysis –\u00a0Reducing number of windows and increasing extension of brise-soleils<\/b><\/p>\n

The ideal lighting level of an office building is in the range of 300-500 lux. In order not to fall below or exceed this range, it is important to install the right number of windows on the exterior facades of the office building. In the following examples, the focus is on the windows on the south and east facades of the office building. To bring the value as close as possible to the ideal range of 300-500 lux, the number of windows was reduced and the extension of their brise-soleils were increased, as a result a change in lighting level was observed. Comparing example 1 and example 2, it can be seen that after reducing the number of windows and raising the extension of the brise-soleils, the same overall lux level was maintained. This ideally allows us to plan the required number of windows and the brise-soleils.\u00a0<\/span><\/p>\n

Example 1:<\/span><\/strong><\/p>\n

\"A1_Example1\"<\/a><\/p>\n

Example 2:<\/p>\n

\"A1_E2\"<\/a><\/p>\n

 <\/p>\n

3D visualization of example 2:<\/p>\n